Operation Manual

Loewe bild
User handbook
85

System settings
Picture
Picture
Here you do the settings referring to the representation of the picture
signal on your TV set.
Calling picture settings
HOME: Call Home view.
 Mark System settings,
OK call System settings.
 Mark Picture,
 go to next column.
Select desired picture function,
 proceed to next column.
Explanations of the picture settings:
Picture
adjustment
You can switch between several fixed picture
adjustment modes and the personal picture values
that you have set here.
See chapter System settings, section Picture –
Picture adjustment for further information.
Contrast The contrast setting depends on the brightness of
the room. The brighter the surroundings the higher
the contrast should be set.
The power consumption of the TV set depends
directly on the value set here.
Brightness Set the brightness so that the black areas of the
picture only just appear black.
Colour
intensity
Set the colour intensity to suit your personal taste.
The colours should appear natural.
You can pinpoint this by the colour of peoples‘ faces
for example.
Image
+
Active
Image+ Active is a special picture improvement
developed by LOEWE which provides a detailed and
contrasting, sharper, natural and true colored picture
which is rich in detail and contrast.
Picture
format
Select the format so that the screen is used to the
fullest possible extent without affecting the natural
proportions.
See chapter System settings, section Picture –
Selecting the picture format for further information.
Menu item is only available if Automatic aspect
ratio
– off is selected .
Automatic
aspect ratio
When automatic aspect ratio is switched on, the TV
set recognizes the aspect ratio for Cinemascope or
wide-screen movies and adjusts itself accordingly.
more ... call with OK.
3D
(1
Do the settings for your TV set‘s 3D display (see
next page).
Colour
temperature
Here, you can give the TV picture a warmer or colder
hue according to your personal taste.
Sharpness Here you can adjust picture sharpness to obtain the
best definition.
Move picture
up/down
In various picture formats, font or graphic insertions
are not or only partially visible at the bottom or at
the top.
You can move the picture up or down with the up/
down menu control keys to make the displays visible.
Menu item only available in the picture formats
panorama or zoom.
Auto
dimming
Two automatic dimming functions are available here
which enable you to adapt the TV picture to the room
brightness, improve the visual contrast and reduce
the power consumption of your TV.
Depending on video (VBD+)
(1
:
The display lighting is reduced depending on the
current video content and the video signal is si-
multaneously amplified in order to get an improved
contrast of your TV picture (Video compensated
Backlight Dimming – VBD).
Depending on the environment (OPC)
(1
:
The contrast of your TV picture is automatically
reduced vs. decreasing room brightness (Optical
Power Control – OPC).
Due to a reduction in the luminance in 3D mode
for technical reasons, this function is deactivated
when showing 3D content.
Film quality
improvement
(DMM)
DMM reduces jolt in rapid picture object movements
and rolling text displays. This applies especially for
movies.
Digital Noise
Control (DNC)
With active DNC (Digital Noise Control) you can
eliminate or reduce picture noise.
Skin tone Adjust the skin tone so that the most natural facial
skin colour is achieved.
Gamma
brightness
correction
If image seems over- or underexposed, you can
adjust it here accordingly.
OLED
calibration
(1
Herewith you start an OLED calibration to ensure an
consistently high picture quality.
OLED
protection
(2
The displayed image content is continuously analysed
by an algorithm which partly fades out static areas of
the image (e.g. broadcaster logo, etc).
This is done to
prevent any potential issues.
Deblocking
filter
To minimise the visible interference to the picture
caused by modern compression methods for images
and image sequences (formation of small blocks),
a so-called deblocking filter can be activated which
counteracts this interference.
PC IN
display
For some PC image formats, horizontal as well as
vertical position and the phase position of the image
can be corrected.
For more information, see chapter System set-
tings, section Picture – Selecting the picture
format.
Menu item only available if there is a valid PC signal
via the VGA adapter at the AV connection.
(1
Availability varies by device type (see chapter Technical data - equipment features for your TV set).
(2
Only for set types with OLED technology.