Operation Manual
Loewe bild
User handbook
97
System settings
Channels
Manual search for cable analogue (analogue cable reception):
Manual search is called.
Cable analogue has been selected as signal source.
Mark and adjust settings,
OK confirm as the case may be.
Mark Search,
OK start search.
If a channel has been found:
Mark Store/Overwrite,
OK store channel.
Explanations on the search settings for cable analogue:
Signal source Selection of range in which you want to search for the
channel.
TV standard
If necessary, ask your dealer which standard to
select for specific channels or AV equipment.
Colour
standard
If necessary, ask your dealer which standard to
select for specific channels or AV equipment.
Channel
Direct input of channel.
Frequency
Direct input of channel frequency.
Range for entry: 044.75 MHz - 859.25 MHz.
Name
Here, the name of the found channel is displayed.
You can change the name of the channel.
Manual DVB-T/C/S search:
Manual search is called.
Mark and adjust settings,
OK confirm as the case may be.
Mark Search,
OK start search.
When a DVB transponder has been found:
Mark the channel,
OK Channel will be ticked with
. If necessary,
repeat for several channels.
Channels that already exist in the channel overview
will be displayed with their channel number on the
left.
Mark Store/Overwrite,
OK Channels marked with
will be stored.
Explanations of some search settings:
Signal
source
(DVB-T/C/S)
Selection of range in which you want to search for the
channel.
Channel
(DVB-T)
Direct input of channel.
Satellite
(DVB-S)
Here you can select the satellite where the channels
are to be searched for.
Band
(DVB-S)
Here you can select the frequency band in which
shall be searched.
Setting ranges: horiz/low 10694 - 11906 MHz
horiz/high 11544 - 12756 MHz
vert/low 10694 - 11906 MHz
vert/high 11544 - 12756 MHz
Frequency
(DVB-T/C/S)
DVB-T/C: Direct input of channel frequency.
DVB-S: Direct input of LNC frequency
Symbol rate
(DVB-S)
Here you can specify the symbol rate
Range: 1000-45000