Operation Manual

Individual 40-55
User guide
22

Initial installation
Select antenna cable.
OK Connect/disconnect antenna cable.
Ahead of each selected antenna, the symbol
appears.
Cable analog: analogue stations via
cable
Terrestrial (DVB-T): digital stations via
antenna
Cable (DVB-C): digital stations via
cable
Satellite (DVB-S/cable 1): digital stations via
satellite
Satellite (DVB-S/cable 2): digital stations via
satellite
 Proceed to next step.
 Considering the plugged CA module(s) specify
which stations should be searched automatically.
If the CA module(s) do(es) not support this func-
tion or if no CA module is plugged in, this step will
be skipped.
 Proceed to next step.
Depending on the antennas (analogue cable, DVB-T,
DVB-C, DVB-S) selected, the appropriate settings
appear below.
Antenna cable(s) for: to antenna socket(s):
Cable analog ANT TV
Terrestrial (DVB-T) ANT TV
Cable (DVB-C) ANT TV
Satellite (DVB-S / cable 1) ANT SAT
Satellite (DVB-S / cable 2) ANT SAT2
Your television will automatically search for stations. With , highlight which antenna
cables are available for your TV set and connect them to the correct antenna sockets,
which are specified here in the right-hand column.
Connect antenna cable(s)
Back with Proceed with
OK
Selecting
antennas
The CA module "name module" provides a special station list "name list".
Taking this into consideration, specify which stations are to be searched
automatically and mark at least one of the two items below with .
All receivable stations excluding stations in the special station list
Stations in the special station list "name list"
Extent of station search
OK
Back with Proceed with
Extent of
station search
Setting options for reception via analogue cable:
If you have not selected Cable analog in the list of available antennas:
Proceed to Setting options for DVB-T reception.
The selection of a Colour standard is only required
when the Location of TV set Other country was
selected. Otherwise, the country-specific default
settings will be preset when selecting the Location
of TV set. This step will be skipped then
 Select appropriate colour standard.
 Proceed to next step.
Depending on the antennas (analogue cable, DVB-T,
DVB-C, DVB-S) selected, the appropriate settings
appear below.
Please select the TV/colour standard.
Automatic BG+L SECAM-BG
PAL-BG SECAM-DK
PAL-DK SECAM-L
PAL-I NTSC
TV/col. standard
Back with Proceed with
TV/col.
standard