Operation Manual

Individual 40-55
User guide
26

Initial installation
Setting options for the satellite system (single satellite):
 Select satellite,
OK Confirm selection.
 Proceed to next step.
 Select Dual band (low/high) or Single band.
Here you specify if you use a Dual Band (Univer-
sal) LNB or a Single LNB.
 Proceed to next step.
 Set LNB frequencies.
OK Adopt settings.
The setting of the LNB frequency is only called
when you have used the setting Single band
in step Dual / single band.
Normally, you do not need to change the values
for high and low band, unless the LNC (LNB) of
your satellite system uses a different oscillator
frequency (important for the frequency display).
 Proceed to next step.
Proceed with Setting options for DVB-S reception
(continued).
Optus D1160°E
Türksat 42°E
Hellas Sat2 39°E
Eutelsat 36A 36°E
Eutelsat 28A 28,5°E
ASTRA2 28,2°E
ASTRA3 23,5°E
Eutelsat 5 West A 5°W
Nilesat 7°W
Eutelsat 7 West A 7,2°W
Eutelsat 8 West A 8°W
Eutelsat 12 West A 12,5°W
Telestart12 12,5°W
Intelsat901 18°W
ASTRA1 19,2°E
Eutelsat 16A 16°E
Hot Bird 13°E
Eurobird 9A 9°E
Eurobird 7A 7°E
ASTRA4A 4,8°E
Thor/Intelsat10-02 0,8
Select satellites
Please specify here which satellite you receive.
Note: The newly selected parameter must be confirmed with the button.
Back with Proceed with
OK
Select
single satellite
Here, please specify whether you are using a Dual Band (Universal) LNB or a Single Band
LNB.
Dual/single band (ASTRA1 19,2°E)
Dual band (low/high) Single band
Back with Proceed with
Dual/single
band
Please specify the oscillator frequency for your LNB.
LNB frequencies
ASTRA1 19,2°E low Band 9750 MHz 10000 MHz 10200 MHz 10600 MHz
Back with Proceed with
LNC
frequencies
Setting options for the satellite system (2 satellites on 22
kHz switchbox / 2 satellites on toneburst switch):
 Mark Satellite 1 / Satellite 2,
 select satellite.
OK Adopt settings.
 Proceed to next step.
 Set LNB frequencies.
OK Adopt settings.
Normally, you do not need to change the values
unless the LNC (LNB) of your satellite system
uses a different oscillator frequency (important
for the frequency display).
 Proceed to next step.
Proceed with Setting options for DVB-S reception
(continued).
Thor/Intelsat10-02 0,8
Eutelsat 5 West A 5°W
Nilesat 7°W
Eutelsat 7 West A 7,2°W
Eutelsat 8 West A 8°W
Eutelsat 12 West A 12,5°W
Telestart12 12,5°W
ASTRA3 23,5°E
ASTRA1 19,2°E
Eutelsat 16A 16°E
Hot Bird 13°E
Eurobird 9A 9°E
Eurobird 7A 7°E
ASTRA4A 4,8°E
Select satellites
Please select satellite 1 and satellite 2.
Note: The newly selected parameter must be confirmed with the button.
Back with Proceed with
OK
none
Optus D1160°E
Türksat 42°E
Hellas Sat2 39°E
Eutelsat 36A 36°E
Eutelsat 28A 28,5°E
ASTRA2 28,2°E
Satellit 1 Satellit 2
Satellite
selection
Please select the LNB frequency for the Low Band. High band frequency is autom. adjusted.
Note: The newly selected parameter in each case must be confirmed with the button.
ASTRA1 19,2°E Low Band 9750 MHz 10000 MHz 10200 MHz 10600 MHz
Hot Bird 13°E Low Band 9750 MHz 10000 MHz 10200 MHz 10600 MHz
LNB frequencies
OK
Back with Proceed with
LNB frequencies
Please select the LNB frequencies for High and Low Bands.
Note: The newly selected parameter in each case must be confirmed with the button.
ASTRA1 19,2°E low band 9750 MHz 10000 MHz 10200 MHz 10600 MHz
ASTRA1 19,2°E high band 10600 MHz 10750 MHz 11000 MHz 11250 MHz
Hot Bird 13°E low band 9750 MHz 10000 MHz 10200 MHz 10600 MHz
Hot Bird 13°E high band 10600 MHz 10750 MHz 11000 MHz 11250 MHz
OK
Back with Proceed with
LNC
frequency
(22 kHz
Switch box)
LNC
frequencies
(Toneburst
switch)