Operation Manual

Individual 40-55
User guide
92

System settings
Stations
Manual search for cable analogue (analogue cable reception):
Manual search is called.
Cable analogue has been selected as signal source.
 Mark and adjust settings,
OK confirm as the case may be.
 Mark Search,
OK start search.
If a station has been found:
 Mark Store/Overwrite,
OK store station.
Explanations on the search settings for cable analogue:
Signal source Selection of range in which you want to search for the
station.
TV standard
If necessary, ask your dealer which standard to se-
lect for specific channels or AV equipment.
Colour
standard
If necessary, ask your dealer which standard to se-
lect for specific channels or AV equipment.
Channel Direct input of channel.
Frequency Direct input of station frequency.
Range for entry: 044.75 MHz - 859.25 MHz.
Name Here, the name of the found station is displayed. You
can change the name of the station.
...
Signal source Cable analog DVB-T DVB-C DVB-S
TV standard B/G I L D/K M
Colour standard PAL SECAM
Channel E 01 S 01
Frequency 044.00 MHz
Name
C/N 40.5 dB
Level 54 dBμV
Signal source Cable analog DVB-T DVB-C DVB-S
TV standard B/G I L D/K M
Colour standard PAL SECAM
Channel E 01 S 01
Frequency 044.00 MHz
Name
C/N 40.5 dB
Level 54 dBμV
Manual TV scan (incl. antenna status)
Here, you can enter all the settings available for a station. However, this requires detailed knowledge.
Search
Back
Manual DVB-T/C/S search:
Manual search is called.
 Mark and adjust settings,
OK confirm as the case may be.
 Mark Search,
OK start search.
When a DVB transponder has been found:
 Mark the station,
OK Station will be ticked with
. If necessary,
repeat for several stations.
Stations that already exist in the station overview
will be displayed with their station number on the
left.
 Mark Store/Overwrite,
OK Stations marked with
will be stored.
Explanations of some search settings:
Signal
source
(DVB-T/C/S)
Selection of range in which you want to search for the
station.
Channel
(DVB-T)
Direct input of channel.
Satellite
(DVB-S)
Here you can select the satellite where the stations
are to be searched for.
Band
(DVB-S)
Here you can select the frequency band in which
shall be searched.
Setting ranges: horiz/low 10694 - 11906 MHz
horiz/high 11544 - 12756 MHz
vert/low 10694 - 11906 MHz
vert/high 11544 - 12756 MHz
Frequency
(DVB-T/C/S)
DVB-T/C: Direct input of station frequency.
DVB-S: Direct input of LNC frequency
Symbol rate
(DVB-S)
Here you can specify the symbol rate
Range: 1000-45000
...
Signal source Cable analog DVB-T DVB-C DVB-S
Frequency 044.00 MHz
QAM modualtion 16
Symbol rate 22000
Netzwork Standard
Station name
C/N 71.5 dB
Level 58 dBμV
BER 0 E-7
Search
Back
Manual TV scan (incl. antenna status)
Here, you can enter all the settings available for a station. However, this requires detailed knowledge.
...
1024 arte HD
1025 kabel eins HD
1026 SPORT1 HD
1027 Cartoon Network
1028 Spiegel TV HD
1024 arte HD
1025 kabel eins HD
1026 SPORT1 HD
1027 Cartoon Network
1028 Spiegel TV HD
Found stations
Search Store/Overwrite
Mark/unmark with
OK
Back