Operation Manual

13 -
English
AudioLink
Line In
Speaker
Out
Power Mode
Left
Center
Right
Left Right Left Right
230V~50/60Hz
Left
Phase
Equalizer
Crossover
Frequency
Bass
Intensity
180°
-3dB
+6dB
50Hz
250Hz
min
max
0°
Subw Right
Rear
Front
OFF ON Auto Manu.
Front Rear
Connection
Connecting the speakers to the audio source
Connect the speaker wires on the bottom of the speaker. One of the two
wires of the speaker cable is marked black. Connect this black wire with the
black screw on your amplifi er or audio output, and the black terminal on the
loudspeaker.
Therefore turn the screw counterclockwise a few turns on. Run the wire end into
the screw and tighten the screw clockwise.
Connect the unmarked wires with the red terminals.
Note the marking on the left and right speaker during connection.
Connecting the subwoofer to the mains
Insert the plug at the end of the cable into the power jack at the bottom of the
speaker.
Secure the cable against accidental unplugging with the strain relief provided.
Plug the power adapter of the two speakers in one outlet with 220 - 240 V
50/60 Hz AC.
Front
left
Front
right
Surround
left
Surround
right
Individual Sound Stand Speaker SL
Power
adapter
Power
adapter
Power
adapter
Speaker
wires