Operation Manual

8
Loewe klang 1 subwoofer
Operating manual
english

Connecting Subwoofer via Digital Audio Link
Connecting Loewe klang 1 subwoofer via Digital Audio Link
Via the DIGITAL AUDIO LINK IN interface, you can digitally connect the klang 1 subwoofer to your TV set
(1
.
Switch off the TV set before connecting the subwoofer.
Using the included network cable, connect the DIGITAL AUDIO LINK interface of the Loewe TV set to the DIGITAL AUDIO LINK IN interface of the klang 1 subwoofer.
If you want to connect a second klang 1 subwoofer, connect the DIGITAL AUDIO LINK OUT interface of the first subwoofer to the DIGITAL AUDIO LINK IN interface
of the second subwoofer.
One of the two wires of the speaker cable is usually marked black. Connect this black marked cable to the black screw terminal OUTPUT TO SPEAKERS on klang 1
subwoofer and the black terminal on the speaker. To this end, turn the screw of the relevant screw terminal on the subwoofer anticlockwise about 5 turns. Guide the
wire end into the screw terminal and close the screw terminal by turning the screw clockwise. Connect the unmarked wires to the red terminals.
Connect the speaker cable to the speaker according to the corresponding installation instructions.
Use the mains cable supplied to connect the 220-240 VAC 50/60 Hz socket of the klang 1 subwoofer to a 220-240V 50/60 Hz socket.
TV-set
klang 1 subwoofer
Speaker
Left
Speaker
Right
Mains socket
Speaker cable
Speaker cable
Mains cable
Network
cable
DIGITAL AUDIO LINK
Network
cable
DIGITAL AUDIO LINK IN
Subwoofer 2
(1
Availability and position of the DIGITAL AUDIO LINK interface depends on the type of TV set.