Operation Manual

Loewe klang 1

Operating instructions

englisch

The loudspeaker was built exclusively for private use, in a household envi-

ronment. The warranty only covers this intended use.

If you’ve brought the loudspeaker from the cold into a warm environment, leave

it standing for about an hour, because of the formation of condensation. Only

use the speakers once they have adapted to the room temperature. To avoid

serious damage to the components.

Cleaning

It is possible that marks from the packaging material can show on the surface

of the floor-standing speaker.

This is not damage to the surface.

Only clean the loudspeakers with a damp, soft, clean and lint-free cloth (without

any aggressive cleaning agents).

Setting up

Loewe klang 1 / Loewe klang 1 + Wall Mount

Remove the magnetic cover on the back of the loudspeaker. Now look at the

terminals of the speaker.

One of the speaker cable wires is black. Connect the black wire to the black

terminal on the loudspeaker. Connect the red wire to the red terminal.

Now put the cover back in place. Pay attention to the correct position of the

magnets! The resulting opening now serves as a cable outlet.

For your safety / Cleaning / Setting up