Operation Manual

10
Loewe klang 5
Operating instructions
english
Settings directly on the Loewe klang 5
Before commencing the start-up and settings, please make sure that all cables
are connected correctly.
LED indicator
The status appears for 10 sec. and then the LEDs will turn off. If one of the control
buttons is pressed, the indicator switches on again.
Settings via control buttons
Using several control buttons you can make various settings on the Loewe klang
5. The corresponding LEDs indicate the status. The LED display switches off
after 10 sec.; when pressing one of the control buttons, the LEDs turn on again.
When connecting the Loewe klang 5 via DIGITAL AUDIO LINK to a TV (SL3xx
chassis and more advanced) the setting GAIN can be made on the television.
The GAIN setting is only locally available, when you operate your speaker
directly via LINE IN
When connecting the Loewe klang 5 to any audio source via LINE IN, these
settings must be done directly on the Loewe klang 5.
All set values remain unchanged after the Loewe klang 5 has been switched on
and off.
SPEAKER CHANNEL settings
Using the SPEAKER CHANNEL button, you can directly select the channel that
you wish to hear via the respective speaker.
Selection of FRONT L/R:
If the speaker is in front of you, beside the TV set, select FRONT LEFT or FRONT
RIGHT.
Selection of REAR L/R:
If the speaker is behind you, select REAR LEFT or REAR RIGHT.
Setting the SPEAKER POSITION
Using the SPEAKER POSITION
button you have the possibility to best adapt
your speaker to the room. The three LED indicators CORNER / WALL / FREE
indicate the selected setting.
The setting for SPEAKER POSITION will only be made locally on the Loewe
klang 5.
Selecting CORNER:
When the Loewe klang 5 is near the corner of the room, select the setting
CORNER .
Selecting WALL:
When the Loewe klang 5 is near a wall, select the setting WALL.
Selecting FREE:
When the Loewe klang 5 is in free space, select the setting FREE.
Adjusting the GAIN +/-
Using the GAIN +/-
 buttons you can adjust the basic volume. The four LED
indicators -12 dB /-6 dB / 0 dB / +6dB indicate the adjusted volume.
The adjustment range of -12 dB to +6 dB can be changed in steps of 1 dB. The
corresponding LED will light up for the values -12 dB, -6 dB, 0 dB and +6 dB. For
intermediate values, the LEDs will be dimmed accordingly
When connecting the Loewe klang 5 via DIGITAL AUDIO LINK, the volume is
set in the sound components wizard (Adjusting the speaker volume, see page
13) on the TV set.
When connecting the Loewe klang 5 via LINE IN, the setting is only locally
done on the speaker.
PAIRING settings
Using the PAIRING button, you can connect your Loewe klang 5 wirelessly to
the Loewe klang link box and then operate it.
The Loewe klang link box is not included in the set of equipment supplied, you
can purchase it any time later from your dealer.

Settings directly on the Loewe klang 5