Operation Manual

8
Loewe klang 5
Operating instructions
english
Wiring the Loewe klang 5
You can guide the connection cable through the opening in the bottom of the
speaker, directly into the stand, to be able to install the connection cables
practically invisibly.
Proceed as follows in order to avoid scratches and damage to your speaker.
Proceed with due care and caution.
1. Remove the cable cover by slightly lifting it.
2. Put the included foam spacer over the stand pipe.
3. Lay the connection cable in the foot of the Loewe klang 5.
4. Remove the foam spacer and fix the cable cover of the base plate by lightly
pressing on it.
5. Remove the blue protecting film on the foot of the Loewe klang 5.

Wiring the Loewe klang 5