Operation Manual

4
Loewe klang link
Quick Start Guide
english
Safety Instructions
The safety instructions contained in the user manual of the TV set and the loudspeakers/subwoofer
are to be observed; they also apply to the Loewe klang link.
Mounting the Loewe klang link
With the supplied self-adhesive hook Velcro strips the Loewe klang link can be attached to the rear
panel of the TV set.
In case of TV sets with a corresponding recess in the rear cable tray you can install the Loewe klang
link directly in the cable tray.
In this case, make sure that the adhesive tapes are not applied to an adhesive label or rating plate, but
directly to the TV rear panel.
 Switch the TV set off using the power switch.
 Pull off the rear foil from two strips of the hook Velcro
strips and attach one strip each to the recesses (A)
at the bottom side of the Loewe klang link.
 Fasten the Velcro sides of the two remaining strips to
the previously glued hook Velcro strips.
 Peel off the backing foil of the two adhesive tapes.
 Press the housing bottom (B) of the Loewe klang link
with the two adhesive tapes firmly to the desired lo-
cation on the TV set rear panel to fix this. The connection sockets (C) must point to the right.
A
A
B
C

Safety Instructions
Mounting the Loewe klang link