Operation Manual
23 -
Internet
Jumping
You can jump to any point in the video via time input.
Yellow button: Open Jump to... dialogue.
Enter the desired time with the numeric buttons.
OK Jump.
➠ Please wait until the video has loaded into the
device. This can take a few seconds, depending
on the bit rate of the film and internet speed.
END: Cancel jump.
Video status bar
The video status bar provides you with further information about the
current playback.
For full image window setting:
END: Show video status bar.
Explanation of status bar symbols
The symbols (in the status bar top right) show you information about
the current playback.
Playback active
Stop playback (pause)
Rewind (double or four times speed)
Fast-forward (double or four times speed)
The bar behind the play time shows you how far the video has been played.
Search video
To search for videos, you can enter keywords in YouTube.
➠ Under MediaNetwork-Menu (page 9) you can set your video search
to world wide or local.
To enter a search term, press a numeric button (from 1
to 9) as often as necessary until the desired character
appears (like using a mobile phone). The available letters
are printed on each button of the remote control. Space
can be found on key 1.
Green button: Switch from small to capital letters and
vice versa.
Yellow button: Delete one character .
The character in front of the cursor is
erased.
OK Start search.
If you are not satisfied with the search results:
Blue button: Try a new search under a new key word.
The input box is cleared.
If you are satisfied with the search results:
Select video from the list.
OK View video.
OK 0 9
-
END
Jump to...
Play time: 00:08:?? (hh:mm:ss)
Jump Time input
INFO
MediaNetwork
Change size Add to favourites
Jump to...
"Flower_Exhibition_1"
Play time: 00:06:24 ( of 00:12:48)
english