Operating Instructions. ■ ■ ■ ■ 233–29374.020 · Printed in Germany ■ Television TV.
Contents Remote control – TV functions 3 Control panels 4 Rear connections 5 Welcome Thank you TV equipment Setup and cleaning 6 For your own safety 7–8 Initial installation Batteries – remote control Connection Switching on Initial installation 2 9 Daily handling Switching on/off Changing channels General menu operation Adjusting the sound Adjusting the picture Operation on the set 10 10 10 11 11 11 11 Modes of operation TV mode Picture in picture EPG mode Teletext mode Video mode 12 – 17 1
Remote control – TV functions Indicator: Operate VCR VTR Indicator: operate DVD DVD Direct operation select for VCR/DVD/TV ✳ PIP operation on/off Video operation with video operating line on/off SV Control 150 Picture menu LP 000 Sound off/on (Mute) EPG operation on/off 1 2 3 4 5 6 7 8 9 T M E OK Set picture format on/off Select programme directly /in the menu: numeric input 0 Select programme up/down /in the menu: select up/down Personal teletext pages on/off Switch on/off – in
Operating panel open ➜ Control panels Calida 5784 ZP L AUDIO R On/Off button Audio input Headphones socket — AVS + To display menu S-Video/video input Operating indicator Channel up/down /in a menu: adjust Standby indicator To display menu Standby indicator Operating panel open ➜ Planus 4872 Z On/Off key Operating indicator Channel up/down /in a menu: adjust — AVS Headphones socket L AUDIO R VIDEO IN Video input S-Video input Audio input Open control panel, press ➜ Planus —
Rear connections Service socket/ Connection Certos Sockets for video recorder, DVD, decoder etc.
Welcome Thank you, TV equipment Disposal for choosing a Loewe product. We are very happy to have you as a customer. This operating manual describes the maximum equipment. Functions marked by ✳ are not available in all TV sets. The illustrated menu contents may vary depending on the TV equipment. You can find out what equipment your TV has in the main information – Technical spec. of TV set. Packing and box You have chosen a very high-quality, longlasting piece of technical equipment.
For your own safety For your own safety and in order to avoid unnecessarily damaging your TV set, please read and observe the following safety instructions: • This TV set is designed exclusively for receiving and reproducing audio and visual (AV) signals. • It is designed for the home or office and may not be used in rooms with high humidity (e.g. bathroom, sauna) or a high concentration of dust (e.g. workshops).
For your own safety • You should never attempt to remove the rear panel of the TV yourself. The set operates with high voltages which could be fatal. Leave repairs and servicing of your TV set to authorized TV technicians. • Do not place the TV anywhere where it may be exposed to vibrations because this can lead to overloading of materials. • Due to the picture tube, TV sets have their center of gravity fairly near to the front.
Initial installation Batteries – Remote control To insert or change the batteries, press the point marked by an embossed arrow. Push the cover of the battery compartment down and remove it. Insert the batteries of the alkaline manganese type LR 03 (AAA) with the correct polarity (+/–). + + Then push the cover back on. Connection Initial installation Mains Connect the TV set to a 230V/50–60 Hertz outlet. Automatic programming of the TV set is started the first time you switch it on. Follow the menus.
Daily handling Switching on/off Your TV set is equipped with an eco-standby power supply unit. The power consumption drops to low power in standby mode. If you want to save even more energy, switch the set off with the On/Off switch. However, please note that EPG data are then lost and timer recordings programmed on the TV set will not be carried out. If the TV is switched on, you can switch it off with the blue On/ Off button on the remote control. The red standby LED on the set lights up.
Daily handling General menu operation Adjusting the sound Adjusting the picture With the TV and picture menus, we show you how to navigate within the menus. Which buttons you can use for operation is shown at the bottom of the appropriate menu. Launch the TV M menu Adjusting the volume Call the Picture menu TV menu Standard settings Picture Sound Connections Settings i Info M Back E End OK Picture Contrast Picture adjustment Colour 32 Brightness Sharpness Tint other ...
Modes of operation TV mode In initial installation and daily operation, the TV set is in TV mode. This is also the case when none of the other modes of operation such as EPG, Teletext, PIP, Video or Radio is selected. Every one of these modes of operation has a menu which you can call with the M-button and with some color button assignments. Main information Call main information i Main information Autom.
Modes of operation Picture in Picture (PIP) ✳ You can display a small picture inside the TV picture. Show/hide PIP picture PIP picture as still frame The frame around the PIP picture must be green. If it is not, press the green button. Press the red button to freeze the PIP picture. Press again – moving picture. Changing the station of the PIP picture The frame around the PIP picture must be green. If not, press the green button. Then select the station as normal.
Modes of operation EPG mode mark a station you want to watch (currently running), memorize or record. EPG is the electronic program guide for TV programs. With this system, you can easily find the stations that interest you (sorted according to time, day, topics and programs). You can memorize stations and station recordings. A wizard is activated the first time you use EPG (not with DVB) which guides you through the necessary settings. Then run the data acquisition (see page 15).
Modes of operation EPG settings If you want to change the provider or want to have other programs evaluated, you can do this in the EPG menu. Provider search Selecting stations for EPG Select the stations here for which information is to be collected. Program selection: 3SAT 0 VCR 1+ARD 2+ZDF 3+SAT.
Modes of operation Teletext mode Other functions for selecting pages Mark a specified page number on the page (Page Catching) Teletext transmits information such as News, Weather, Sport, Program Previews and Subtitles. T Teletext on/off 1OO 1OO ARD-Text ARD-Text werden . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 1O.3O Ein Zwilling zu viel . . . . . . . 314 12.OO Tagesschau um zwölf O1.O7.
Modes of operation Show/hide video control bar ▼ ❚❚ ▼ ▼ ▼ ● AUX STOP ▼ ▼ ■ ▼ AV1 ▼ ▼ STOP ■ ▼ AV2 ▼ ▼ V= OK ❚❚ i Info M Menu E End Select the video control bar if several VCR’s or a DVD player and a VCR are connected. Pause (PAUSE) Next chapter (only for DVD) ▼ You can operate Loewe video recorders and DVD players with the video control bars even if they are hidden. The VCR’s must be connected to the Euro AV sockets (Scart) and logged in under the ”Connections” menu.
Operating additional equipment Logging in AV equipment You have already logged in and connected all the connected videos with the connection wizard in initial installation. If you now want to connect additional or different equipment, you have to launch the connection wizard in the TV menu ”Connections”. Connecting VCR equipment In addition to the connection via the Euro-AV socket, you also have to connect the antenna (only for antenna or cable systems) through the VCR to the TV set.
Operating additional equipment Video playback In order to see the VCR picture on your TV and hear its sound you have several possibilities: 1. You can use the Euro-AV sockets on the TV set and on the VCR. This is the best option of all – good picture and sound quality. If you are playing back from a VCR with Digital Link Plus, the VCR picture is shown on the current station slot.
Operating additional equipment Operating Loewe video recorders and Loewe DVD players directly You can switch over the remote control of the TV set to operate Loewe video recorders and Loewe DVD players. These devices can be operated directly or, in the case of equipment installed in a concealed place, by the TV set. In this case the Digital Link function of the VCR must be switched on. Select the device to be operated: for VCR: the VTR indicator on the remote control lights up ...
What to do when ... Problem Possible cause Remedy Various menu items cannot be called (shown in gray) or the menus for the EPG and teletext modes of operation cannot be called ”Simplified control” activated in main information Deactivate ”Simplified control” in the main information. Press the i-button, select ”Select control level” and call with OK. Set the ”Simplified control” to ”no”.
What to do when ... Problem Possible cause Remedy Connection of a decoder does not work or does not work properly a) The signal is not decoded because the correct decoder programs have not been selected in the TV menu - Connections b) The sound is missing in decoder mode because the wrong decoder sound is allocated in the TV menu - Connections a) Follow the instructions in the TV menu – Connections again and select the appropriate decoder programs.
Technical data Mechanical data Electrical data Accessories available Calida 5784 ZP Dimensions (cm) Weight (kg) Picture tube Format Screen class Article no. 61412 79x73x54 (WxHxD) 54 Blackline S 4:3 84, visible 81 cm Chassis name Image refresh frequency Racks Ask your dealer, he will be able to offer you the right rack from the Loewe range to suit your TV set. Planus 1663 Z Dimensions (cm) Weight (kg) Picture tube Format Screen class Article no. 59115 73.0x54.5x46.
Service addresses Australia International Dynamics Australasia Pty Ltd. 129 Palmer Street AUS - Richmond, Victoria 3121 Tel. 03–94 29 08 22 Fax 03–94 29 08 33 Austria Robert Bosch AG Postfach 146 A–1011 Wien Tel 01–79 72 24 500 Fax 01–79 72 24 599 Benelux Loewe Opta Benelux NV/SA Lt. Lippenslaan, 54B B–2140 Antwerp Tel. 0902–88 00 2 Fax 030–280 33 27 Loewe Opta Nederland B.V. Ravenswade, 54A1 NL–3439 LD Nieuwegein (Utrecht) Tel. 0900–280 33 27 Fax 030–803 327 CIS Service Center Loewe ul.
✄ co se de n ch cre um ild t loc cod ber k. e a 300 sa Plea nd w 1 ca fe se i n pla ke th cel ce ep it t s o .