Operation Manual

Everyday Use
You can receive FM radio stations with your Sound Projector. The device can save
up to 40 stations. If the station transmits additional information via RDS, it can be
shown on the Sound Projector display.
Radio Setup
Connect your Sound Projector via the FM ANTENNA IN socket (page 7) and the
antenna cable supplied with an FM antenna socket (page 13).
Set the remote control ASSIST for FM radio operation by
pressing the SP button and holding it.
Automatic search
Pressing the button and holding it down: The FM radio
reception range is automatically scanned and the radio
stations found are continuously saved.
Setting the stations manually
Press the button: Manual Preset is displayed.
P+ / P- Select the desired memory location for the station.
Briefly: fine-tuning forward; long: search forward.
Briefly: fine-tuning backwards; long: search backwards.
or
Input the transmitter frequency of the station, e.g. 8900 for
89.00 MHz (two decimal places).
Pressing the button briefly: The frequency that has been set is
automatically stored at the previously selected memory
location.
➠ If required, save the station to another memory position
before overwriting it with another station.
Radio Operation
Set the remote control ASSIST for FM radio operation by
pressing the SP button and holding it.
P+ / P- Select station up/down.
Enter the two digit station number.
Press several times: Select RDS display
Programme Service Station name
Programme Type Programme type
Radio Text Text messages
Clock Time Time
Frequency Transmitter frequency
V+ / V- Volume up / down.
Sound on / off.
29 -