Operation Manual

n
Loewe SoundBox ID - 24 -
Deutsch English Français Italiano Español Nederlands DanskSuomi
Svenska
n
- 24 -
Instructions for Use
Control
Wake-up function Sleep function
Wake-up function
Your SoundBox ID can wake you up at a preset time with one of the
available audio sources or an acoustic signal.
Setting the wake-up time
Keep the ALARM button
10
pressed for > 2 seconds.
The LED indicator light above the unit button ALARM
and the hour display of the wake-up time ashes.
Press the unit buttons
13
/
14
to set the wake-up time
“hours”.
Press the unit button to conrm.
Press the unit buttons
13
/
14
to set the wake-up time
“minutes”.
Press the unit button to conrm.
Press the unit buttons
13
/
14
to set the wake-up
signal.
BEEP A signal sound is emitted for the wake-up time
SOURCE The music source set is played for the wake-up
time
SRC+BEEP The music source set is played and a signal
sound is emitted for the wake-up time
Press the unit button
16
to conrm.
Press the unit buttons
13
/
14
to make further settings
for the selected source, e.g. the desired radio station
for FM radio.
Press the unit button
16
to conrm.
Press the unit buttons
13
/
14
to set the volume of the
wake-up signal.
Press the unit button
16
to conrm.
The LED indicator light
21
above the unit but-
ton ALARM lights up. This shows that the alarm is
switched on.
Activate/Deactivate wake-up function
Use the button ALARM
10
or a long press of the but-
ton
4
on the remote control to switch the alarm off.
The LED indicator light
21
above the ALARM button
shows whether the wake-up function is active. The
wake-up time is displayed briey when activating the
wake-up function.
➠ If the audio source set is not available during the wake-up time
(e.g. iPod is not in the dock), the acoustic sound will be buzzed.
Snooze function
Press and hold the button or press one of these
buttons on the device when the alarm goes off:
. The alarm stops and auto-
matically starts again in ve minutes.
The LED indicator light above the unit button ALARM
ashes.
The alarm is switched off.
Set alarm volume.
If the wake-up signal SRC+BEEP has been set, pressing
the button once stops the acoustic sound and
if you press it again the music source.
Switch off alarm
Use the button ON/OFF
18
or ALARM
10
or a long
press of the button
4
on the remote control to
switch the alarm off..
The LED indicator
21
light above the unit button
ALARM goes out.
➠ The wake-up signal stops automatically after about 60 minutes.
➠ The wake-up function is deactivated after switching off the wake-
up signal. Activate the wake-up function again, as described under
“Activating /Deactivating the wake-up function”.
Sleep function
You can listen to music for a certain time with the SoundBox ID until it
switches off automatically.
Setting the run time
Select desired music source.
Select desired play time 30, 60, 90, 120 Min / SLEEP
OFF by long pressing again.
Switch off automatically
The unit switches off itself after an adjustable time.
Long press: select the settings menu.
5 6 Select option AUTO POWER OFF.
Press OK to conrm.
5 6 Set 8H or 4H.
Press OK to conrm.
Long press: quit Settings menu.