Operation Manual

SoundPort Compact
Operating instructions
English
37
Sound settings
With your SoundPort Compact you have the possibility to select predefined sound settings for audio
playback.
Selecting the sound settings
Press the SRC key
2
on the SoundPort Compact for a longer period (approx. 2 sec).
The LED display
8
shows the last selected sound setting (e.g. classic).
Press the + key
4
or – key
5
repeatedly until the desired sound is selected (e.g. flat).
If no key is pressed for a few seconds, the previously selected source will be indicated again.
LED display of the sound settings
1 LED display: presetting flat
2 LED displays: presetting voice
3 LED displays: presetting classic
4 LED displays: presetting pop
Charging the audio source
You may charge the battery of your audio source, e.g., a mobile phone, iPad, etc. via your SoundPort Compact.
The power switch of the SoundPort Compact must be switched on.
Only one device should be charged at the same time.
Charging of iDevices at the Lightning Connector:
Plug your iDevice with Lightning Connector on the Lightning Connector
6
built-in in the
SoundPort Compact (see pages 39 and 40).
Charging of USB audio sources:
Connect the type A plug of the USB cable into the USB socket
16
of the SoundPort Compact.
To do this, use a USB cable with type A plug suitable for your audio source (commercially
available).
The connected device (Lightning / USB) is charged in both the operating and the
Smart Standby mode of the SoundPort Compact. The audio source will not be charged
in Standby mode.
SRC

Sound settings
Charging the audio source