Operation Manual

SoundPort / SoundPort Compact / SoundPort Mini
Operating instructions
English
49

Audio playback / Adjusting the volume
Audio playback
An audio source must be connected or linked with the SoundPort.
In the source selection this audio source must be selected (see page 39).
The LED display
8
shows the selected source, e.g., USB Audio.
Start the audio playback on your audio source. The playback control (title selection,
winding, etc.) is done via the player/app of the audio source.
Adjusting the volume
When using an audio cable connection (see page 41) adjust the volume of your
audio source to a high level to avoid interfering noise. Adjust the desired volume on
the SoundPort.
When connecting iDevices via Bluetooth (see page 44) the volume adjustment
between iDevice and SoundPort is coupled, i.e. change in the volume of one of the
devices alters the volume of the other one.
Loud music can lead to ear damage. Avoid extreme volume especially over long periods.
After 10 minutes without audio playback or key operation, SoundPort automatically
switches to Smart Standby mode.
The LED display
8
indicates the selected source, e.g., Apple Lightning Connector.
Set the volume on the SoundPort using the keys +
4
and –
5
.
The volume can be adjusted in several steps
(1
which are represented visually by four
LEDs of the LED indicator
8
.
Pressing briefly the key +
4
or –
5
increases or decreases the volume by one step.
When keeping the + or - key depressed you traverse the whole volume range.
The maximum volume is indicated by two flashes of all LEDs with full brightness.
If there is no volume change within three seconds, the LED display
8
shows the colour
of the selected source again.
Mute the SoundPort by pressing the + and - keys simultaneously. All four LEDs of the
LED display
8
flash with full luminous intensity.
By pressing the + or - key the muting is cancelled. The LED display shows the previously
selected source again.
MIN MAX
Vol -
Vol +
(1
see Technical data on page 55.