Operation Manual

SoundPort / SoundPort Compact / SoundPort Mini
Operating instructions
English
39
Source selection
The SoundPort offers several ways to connect and select audio sources. Each source is assigned a dif-
ferent colour on the LED display.
LED colours of the individual sources
AUDIO IN (green)
How to connect an audio source via a 3.5 mm stereo cable to the AUDIO IN port of the
Soundport is described on page 41.
Apple Lightning Connector (violet)
How to connect iDevices to the Lightning Connector is described on page 42/43.
Bluetooth (blue)
How to link audio sources via Blutooth / NFC is described on pages 44/45.
USB Audio (yellow)
How to connect audio sources to USB is described on page 46.
PC Audio (pink)
How to connect the SoundPort as a USB device is described on page 47.
Selection of the source
Each time you press the SRC key
2
you go to the next source.
The sequence of the sources corresponds to the sequence of the LED colours described
above.
Having selected the source, the SoundPort tries to establish a connection to the audio
source via the selected port.
During the search, the LED display
8
flashes in the selected source colour (the maximum
search time is 30 sec).
If successful, the LED display
8
lights up in the selected source colour.
If the search was not successful the LED display
8
lights up dimmed in the selected
source colour (60% brightness).
SRC

Source selection