Operation Manual

SoundPort / SoundPort Compact / SoundPort Mini
Operating instructions
English
48
SoundPort – iTunes Sync
An iDevice
(1
device connected to the Lightning Connector of the SoundPort can be synchronised via the
SoundPort with iTunes on your PC/laptop. The SoundPort serves as a connecting link between iDevice
and PC/Laptop.
The functionality of this application depends on the PC, notebook, operating system,
iTunes, Apple iOS and iDevice as well as on the respective software versions used.
The SoundPort is connected to the PC as a USB device (see page 47).
An iDevice is contacted on the Lightning Connector of the SoundPort (see page 43).
Apple Lightning Connector is selected as source (see page 39).
iTunes is installed on the PC/notebook and the automatic synchronisation is enabled
(for iTunes settings see the software documentation).
The LED display
8
indicates the Apple Lightning Connector as selected source.
Press the key
3
on the SoundPort for a longer period (approx. 3 sec). to activate the
Sync mode.
The LED display
8
flashes during the sync process from left to right.
Also note any possible notifications and messages of the operating system or from
iTunes on your PC/notebook.
During the sync process, no other functions (switching off, source selection, handsfree
talking, volume change etc.) are possible with the SoundPort.
Press the key
3
on the SoundPort for a longer period (approx. 3 sec) to end the Sync
mode.
iTunes

Sync
(1
Supported iDevices see page 54.