Operation Manual

Subwoofer 300
Operating instructions
11
english
Adjusting the SUBWOOFER GAIN
Using the SUBWOOFER GAIN +/-
 buttons you can adjust the basic bass
volume. The three LED indicators -6 dB / 0 dB / +6dB indicate the adjusted
volume.
The adjustment range of -6 dB to +6 dB can be changed in steps of 1 dB. The
corresponding LED will light up for the values -6 dB, 0dB and +6dB. For inter-
mediate values, the LEDs will be dimmed accordingly.
When connecting the subwoofer via DIGITAL AUDIO LINK, the subwoofer
volume is set in the sound components wizard (Adjusting the speaker volume,
see page 13) on the TV set.
If after configuring the subwoofer via the sound components wizard the
SUBWOOFER GAIN setting is changed locally with the buttons on the first
subwoofer, an on-screen display appears with the modified values.
Setting the BASS EQ
When using the BASS EQ
button, you can set the lowest frequency ranges (20
Hz - 50 Hz) for bass reproduction to be raised or lowered. The three LED indica-
tors REDUCE / NORMAL / BOOST indicate the selected setting.
The setting for BASS EQ will only be made locally on the subwoofer.
Selecting REDUCE:
When the subwoofer is near the corner of the room, select the setting REDUCE
(-3 dB).
Selecting NORMAL:
When the subwoofer is near a wall, select the setting NORMAL (0 dB).
Selecting BOOST:
When the subwoofer is in free space, select the setting BOOST (+3 dB).

Settings directly on the Subwoofer
Setting the CONNECTED SPEAKERS
With the CONNECTED SPEAKERS
button you select the speaker type that is
connected to the subwoofer. The three LED indicators SMALL / MEDIUM /
LARGE indicate the selected setting.
Depending on the setting, the crossover frequency for the bass response
changes (small = 160 Hz, medium = 110 Hz, large = 80 Hz).
The setting for CONNECTED SPEAKERS will only be made locally on the
subwoofer.
For certain Loewe speaker types, a compensation curve is stored to achieve
optimum audio playback.
Speaker types:
Small: Loewe Satellite Speaker (Art. no. 66201xxx)
Medium: Loewe Speaker (Art. no. 56223xxx)
Large: Loewe Stand Speaker (Art. no. 66202xxx)
A long press (about 4 sec.) on the CONNECTED SPEAKERS button turns off
the stored compensation curve. This provides the possibility to use other types
of speakers. The flashing LED indicates that the compensation curve has been
disabled. The crossover frequency can be changed as described above.
To enable the compensation curve again, press button again and hold.