Operation Manual

Subwoofer 300
Operating instructions
7
english

Configuration examples
Configuration examples
Connector/set-up solution with one subwoofer (2.1 / 3.1 system)
When configuring a 2.1 / 3.1 system, the subwoofer is connected to the audio
source either via DIGITAL AUDIO LINK or LINE IN. In a 3.1 system, two speakers
are connected to the subwoofer.
How to connect the subwoofer via DIGITAL AUDIO LINK is described on page
8. The connection via LINE IN is described on page 9.
An example of a 2.1 system
TV-set
Subwoofer 300
Front
right
Front
left
DIGITAL AUDIO LINK / LINE IN
TV speaker
as centre speaker
Front
left
Front
right
TV speaker
as centre speaker
Subwoofer 300
TV-Gerät
Subwoofer 300
DIGITAL AUDIO LINK / LINE IN
TV Lautsprecher
als Front L / R
An example of a 3.1 system
Connector/set-up solution with two subwoofers (5.2 system)
When expanding a 3.1 system connected to DIGITAL AUDIO LINK by a second
subwoofer, you get a 5.2 system. The speakers connected to the second sub-
woofer represent the surround channels.
How to connect the subwoofer via DIGITAL AUDIO LINK is described on page
8.
TV set
Subwoofer 300
(1)
Subwoofer 300
(2)
Front
right
Front
left
Surround
right
Surround
left
DIGITAL AUDIO LINKDIGITAL AUDIO LINK
TV speaker
as centre speaker
Front
left
Front
right
Surround
left
Surround
right
Subwoofer 300 (1)
TV speaker
as centre speaker
Subwoofer 300 (2)
An example of a 5.1 system
A set-up example of a 3.1 system
A set-up example of a 5.2 system