User's Manual

7 8
DISPLAY MAIN UNIT
Stand and Batteries Installation
The unit is designed for desktop or wall mount for easy viewing.
1. Remove the battery door of the main unit.
2. Insert 2 new AA size batteries according to the “
+/-
” polarity mark on the battery compartment.
3. Replace the battery door.
4. Once the batteries are inserted, all the segments of the LCD will be briey lighted up before
entering automatic linking process with the remote sensor, as indicated by the ashing " ".
5. Press the
[ SCAN ]
button if the " " is not ashing, to manually activate the linking process.
6 . Press the
[ RESET ]
button at the bottom of the sensor. After successful linking with the sensor,
the clock will automatically set its time by the Radio-controlled (RC) signal, as indicated by the " ".
NOTE:
1. If no display appears on the LCD after inserting the batteries, press the
[ RESET ]
button by
using a pointed object.
2. In some cases, you may not receive the RC signal immediately due to the atmospheric
disturbance.
Pairing of Wireless Sensor with Display Main Unit
After insertion of batteries, the Display Main Unit will automatically search and connect the wireless
sensor (antenna blinking " ").
Once the connection is successful, antenna mark " " and readings for outdoor temperature and
rainfall will appear on the display.
Changing Batteries of Thermo-Rain Gauge Sensor
Whenever you changed the batteries of the wireless sensor, pairing must be done manually.
1. Change the batteries to new ones.
2. Press the
[ RESET ]
button on the sensor.
3. Press the
[ SCAN ]
button on the Display Main Unit.
NOTE:
1. Pressing
[ RESET ]
button at bottom of the wireless sensor will generate a new code for
pairing purpose.
2. Always dispose old batteries in an environmental safe manner.
Radio-controlled / Atomic Clock Function
This main unit is programmed to synchronize with Radio-controlled time signal.
Version Time signal Signal broadcast
North American WWVB(US) Within 3200 km (2000 miles) of Fort, Collins, Colorado
The unit synchronizes itself automatically to the RC signal daily. The “ ” icon will appear on the LCD
upon successful synchronisation each time.
NOTE:
1. The strength of radio-controlled time signal from the transmitter tower may be a󰀨ected by
geographical location or building around.
2. Always place the unit away from interfering sources such as TV set, computer, etc.
3. Avoid placing the unit next to metal plates.
4. Closed areas such as airport, basement, tower block or factory are not recommended.
Time Setting
The unit automatically set itself according to the Radio Controlled Clock signal it received. To set
the clock/calendar manually in areas where reception of signal is not permitted, users may rst
disable the reception by holding the
[ RCC ]
button for 8 seconds until the "OFF" icon display on
the clock.
To Manually Set the Clock / Time Zone Selection
1. Press and hold
[ CLOCK ]
button for 2 seconds until “12 or 24 Hr” ashes.
2. Use
[ UP ]
/
[ DOWN ]
button to adjust, and press
[ CLOCK ]
button to proceed to the next
setting.
3. Repeat 2 above for setting of T
IME ZONE, HOUR, MINUTE, YEAR, MONTH&DATE
or
DATE&MONTH, MONTH, DATE, HOUR OFFSET, LANGUAGE
and
DST
.
NOTE:
1. The unit will automatically exit setting if no key was pressed in 60 seconds.
2. Time zone setting is only for North American version where the unit receives
WWVB
signal.
User can select
PST, MST, CST, EST, AST
or
NST
.
4. The language options are English (EN), French (FR), German (DE), Spanish (ES), Italian (IT),
Dutch (NL) and Russian (RU).
5. DST (Daylight Saving Time) feature is set to Auto (factory set). The clock has been
programmed to automatically adjust its time forward by one hour when the daylight saving
time (DST) is in e󰀨ect. User can set the DST to OFF to disable the feature.