™ 7-IN-1 WIRELESS WEATHER STATION WITH WI-FI® AND SOLAR PANEL USER GUIDE LOWSC710SWB
Thank you for purchasing the Logia™ 7-in-1 Wireless Weather Station with Wi-Fi and Solar Panel. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty. ® Please read all directions before using the product and retain this guide for reference. This product is intended for household use only.
SAFETY PRECAUTIONS WARNING! Please read and understand all safety precautions, operating instructions, and care/maintenance instructions before operating this appliance. Keep this manual for future reference. • This product is not a toy. Keep out of the reach of children. • This product is designed for use in the home only as indication of weather conditions. This product is not to be used for medical purposes or for public information. • Do not clean the unit with abrasive or corrosive materials.
PRODUCT FEATURES 1. Wireless 7-in-1 weather sensor measures wind speed, wind direction, rainfall, UV, light intensity, temperature, and humidity. 2. No calibration needed! The product is fully pre-calibrated and mostly assembled; all you need to do is install it and sync with the included display console. 3. Provides precise weather and environmental information directly from your own backyard, instead of relying on a national weather station. 4. Color LCD display with dimmable backlight. 5.
SOLAR PANEL TM LOWSC710SWB NTS 7-IN-1 WIRELESS WEATHER STATION WITH Wi-Fi® AND SOLAR PANEL 350mm ews amp -Low wind chill -Temperature -High/low dew point -Humidity Features: ® • Syncs to online weather servers • Longer battery life with built-in solar panel • Precise weather & environmental information • Wireless outdoor weather sensor measure: via Wi-Fi • Compatible• 12with Weather and • Fully pre-calibrated ~ 24-hour weatherUnderground forecasting -Wind speed • Color LCD display screen -Wind direct
weather weather readings readings with advanced with advanced features, features, such as such high/low as high/low alert alarm, alert alarm, different different weather weather index,index, and MAX/MIN and MAX/MIN records. records.
1. [ SNOOZE ] key CONSOLE DISPLAY OVERVIEW 2.LCD[ HISTORY ] key 3. 4. 5. 6. 7. 8. [ MAX / MIN ] key [ CHANNEL ] key [ BARO ] key [ WIND ] key [ SUNT ] key [ RAIN ] key 9. LCD display 10. [ WI-FI / SENSOR ] key 11. [ REFRESH ] key 12. Wall mounting holder 13. [ CLOCK SET ] key 14. [ V / INDEX ] key 15. [ Ʌ ] key 16. [ OFF / LO / HI ] key 2 17. Table stand 18. [ ALARMT ] key 19. [ ALERT ] key 20. Power jack 21. Battery compartment 22. [ °C / °F ] key 23.
2. 3. 4. 5. Wind direction & speed Indoor (Ch) temperature & humidity Weather index UV index & light intensity (SUN) 7. Barometer 8. Rain 9. Time & Data, moon phase, Sunrise/Sunset time WIRELESS INDOOR HYGRO-THERMO SENSOR OVERVIEW WIRELESS INDOOR HYGRO-THERMO SENSOR 11 2 2 3 3 4 4 5 5 1. Transmission status LED 1. Transmission status LED 2. Wall mounting holder 3. Channel switch 2. Wallslide mounting holder 3. Channel switch 4. [ RESET ] key 4. RESET button 5. Battery compartment 5.
9 77 88 10 10 11 11 12 12 1. Antenna 7. Bubble level gradienter 2. Radiation shield & Thermo-hygro sensor 8. Rain collector 3. Mounting parts (fit for 35 ~40mm diameter 9. Wind vane pole) 10. UV / light sensor Battery door 1.4. Antenna 5. RESET button11. Solar panel 9. Wind direction vane 5. [ RESET ] key 12. Wind cups 10. UV/light sensor 2.6. Radiation shield &status LED 6. Transmission status LED Transmission hygro-thermo sensor 3. Mounting parts 4. Battery door 7. Bubble level gradienter 11.
Your console can pair up with one wireless 7-in-1 outdoor sensor and up to 7 wireless indoor sensors. (1pc wireless indoor sensor included) INSTALL WIRELESS 7-IN-1 SENSOR Your wireless 7-IN-1 sensor measures wind-speed, wind-direction, rainfall, UV, light intensity, temperature and It’s assembled for your easy installation. 1. Align the notches onhumidity the funnelfor withyou. the lock grooves insideand the calibrated rain collector. SETTING UP RAIN COLLECTOR INSTALL RAINin COLLECTOR 2.
NOTE: MOUNTING POLE AND DIRECTION ALIGNMENT Install the wireless 7-IN-1 sensor in an open location with no obstructions above and around the Point to sensor for accurate rain and wind measurement. NORTH Install the sensor with the smaller end facing the North to properly orient the wind direction vane. Secure the mounting stand and bracket (included) to a 35 ~ 40mm diameter steel post or pole, and allow minimum 2m off the ground.
SETTING UP THE WIRELESS INDOOR HYGRO-THERMO SENSOR INSTALLING THE BATTERIES LESS INDOOR SENSOR battery door the sensor. 1. of Remove the battery door on the back of the sensor. nnel slide switch to set the channel number for the Channel 1)2. Use the channel switch to set the channel number for the sensor. size batteries into two the (2) battery compartment and close 3. Insert AA batteries into the battery compartment according to the +/- polarity labeled in oor accordingthe to compartment.
POWERING UP THE CONSOLE 1. Plug the power adapter to the power jack located in back of the console. 2. Once the console is turned on, it will automatically enter pairing mode. NOTE: If the LCD display does not turn on, use a pin or other small object to press the RESET button on back of the console. 1. Remove the battery door AND of the console. PAIRING THE WIRELESS 7-IN-1 SENSOR INDOOR SENSOR 2. Insert 3 new AAA batteries as per the polarity indicated, 1.3. Once your display consoledoor.
to use Wunderground.com or Weathercloud.net, leave the check boxes unchecked.
SETUP THE WEATHER SERVER CONNECTION Enter the following information into the below web interface "SETUP" page to connect the console to weather server, If you do not want to use Wunderground.com or Weathercloud.net, please empty the station ID & key to ignore the data upload.
NOTE: - When WI-FI setup is completed, your PC or mobile will resume your default WI-FI connection. - During AP mode, you can press and hold the [ SENSOR / WI-FI ] key for 6 seconds to stop TIMEmode ZONE and the console will restore your previous setting.
Press "ADVANCED" key at the top of web interface to enter the advance setting page, this the battery dooras ofupdate the console. page allow you to set and view the calibration data1.of Remove the console, as well the 2. Insert 3 new AAA batteries as per the polarity indicated, firmware version on PC web browser. 3. Replace the battery door.
CREATE AND SYNC YOUR WEATHER SERVER ACCOUNT Your display console can upload weather data to Weather Underground and/or Weathercloud via your Wi-Fi® router. NOTE: Logia™ does not own Weather Underground or Weathercloud, and these instructions are liable to change without notice due to changes in either website. CREATE YOUR WEATHER UNDERGROUND ACCOUNT 1. 2. Make sure your display console is connected to your Wi-Fi® network, as outlined in brief below.
device. 4. Follow their instruction to enter your station information, in the Step "Tell Us More About Your Device", (1) enter a Name for your weather station. (2) choose “Other” in “Device Hardware” section and fill in other the other information (3) select "I Accept" to accept Weather underground's privacy terms, (4) click “Next” to create your station ID and key. (1) (2) (2) (3) (4) 7 for the further setup step. 5. Jot down Your "Station ID" and "Station key" CREATE WEATHERCLOUD ACCOUNT 1.
CREATE WEATHERCLOUD ACCOUNT YOUR WEATHERCLOUD ACCOUNT 1 . InCREATE https://weathercloud.net enter your information in "Join us today" section, then follow CREATE WEATHERCLOUD the instructions to create ACCOUNT your account . Visit the Weathercloudenter website https://www.weathercloud.net and enter information in 1 . In1.https://weathercloud.net yourat information in "Join us today" section, thenyour follow CREATE WEATHERCLOUD ACCOUNT the instructions to says create your account .
4 . Jot down your ID and key for the further setup step. SETUP WI-FI CONNECTION 1 . WhenVIEW youYOUR firstWEATHER power up the console,UNDERGROUND or press and hold the [ WI-FI / SENSOR ] key for 6 DATA IN WEATHER " icon to signify that it has seconds in normal mode, the console LCD will show "AP" and " To view your weather station dataand liveisviaready PC orfor mobile websettings. browser, visit http://www.wunderground.
4. Click the corresponding Upload button to transfer the updated file to the console. 5. The file will install automatically once it is uploaded. You can view update progress on the display console in the wind direction section (the number displayed will correspond to the percentage completed, so 50 = 50% and so on). 6. The console will restart once the update completes. NOTES: You cannot update the Function Firmware and Wi-Fi® Firmware at the same time. Updates must be installed one by one.
While adjusting settings, you can press and hold the CLOCK button for two (2) seconds to return to normal mode. NOTE: Moon Phase - In alarm mode, the “ ” icon will display on the LCD. The display console calculates the moon phase according to your time, date, and time zone. The table below explains the corresponding phases and their icons for both Northern and Southern hemispheres.
No signalthe Alarm & TemperatureWeak signal Activating/Deactivating Pre-Alarm Good signal The temperature pre-alarm will alert you 30 minutes prior to your alarm time whenever the outdoor temperature falls below 26.5 °F (-3 °C). 1. In normal operating mode, press the ALARM button to display the set alarm time for five (5) seconds. cold Comfortable Too again hot to cycle 2. When the Too alarm time is being shown on the LCD display, press the ALARM button through the alarm functions as shown below.
the next day. - By pressing [ALARM / SNOOZE] key to enter snooze that the alarm will sound again after 5 minutes. - By pressing and hold [ALARM / SNOOZE] key for 2 seconds to stop the alarm and will activate again in the next day Viewing Outdoor Channels - By pressing [ ALARM ] key to stop the alarm and the alarm will activate again in the next day.
No signal Weak signal Good signal 2 . If the signal has discontinued and does not recover within 15 minutes, the signal icon will disappear. The temperature and humidity will display “Er” for the corresponding channel. 3 . If the signal does not recover within 48 hours, the “Er” display will become permanent. You need to replace the batteries and then press [ SENSOR / WI-FI] key to pair up the sensor again .
Beaufort Scale Description 0 Calm 1 Light air 2 Light breeze 3 Gentle breeze 4 Moderate breeze 5 Fresh breeze 6 Strong breeze 7 High wind 8 Gale 9 Strong gale 10 Storm 11 Violent storm 12 Hurricane force Wind Speed < 1 km/h < 1 mph < 1 knots < 0.3 m/s 1.1 ~ 5km/h 1 ~ 3 mph 1 ~ 3 knots 0.3 ~ 1.5 m/s 6 ~ 11 km/h 4 ~ 7 mph 4 ~ 6 knots 1.6 ~ 3.3 m/s 12 ~ 19 km/h 8 ~ 12 mph 7 ~ 10 knots 3.4 ~ 5.4 m/s 20 ~ 28 km/h 13 ~ 17 mph 11 ~ 16 knots 5.5 ~ 7.
~ 33 knot against the wind. 13.9 ~ 17.1 m/s 62 ~ 74 km/h Some twigs broken from 39 ~ 46 mph trees. Cars veer on the 8 Gale road. Progress on foot is 34 ~ 40 knot WEATHER seriously impeded. 17. 2 ~ 20.7 m/s Weather Indexes 75 ~ 88 km/h Some branches break off trees, When reading the Weather Index display, you47 can~ 54 press cycle through different mphthe INDEX button and to some small trees blow gale order: Feels Like > Heat Index > Wind Chill > Dewpoint. weather 9indexes in theStrong following over.
91 °F to 105 °F (33 °C to 40 °C) Extreme Caution PossibilityEmpty of heat dehydration plastic bins tip over. 10.8 ~ 13.8 m/s 106 °F to 129 °F (41 °C to 54 °C) Danger Heat exhaustion likely ensor's temperature and wind speed data determines 50 ~ 61 km/h the Whole trees in motion. 31 ~ Danger 38 mph ≥ 130 °F (≥ 55 °C) Extreme Strong risk of dehydration / sun stroke Effort needed to walk 7 High wind 28 ~ 33 knot against the wind. 13.9 ~ 17.
LATIVE BAROMETRIC READING key to switch between ABSOLUTE / RELATIVE barometric RAIN Rainfall e rainfall and rain rate The Rainfall shows information regarding the rainfall and rain rate. or 2 seconds toRainfall enter Units unit setting mode. Set the le the rainfall unit between mm and in. 1. Press and hold the RAIN button for two (2) seconds to enter unit setting mode. and exit 2. thePress setting. the or buttons to toggle the units of measure for rainfall between mm and in. 3.
NOTE: To ensure to have correct data, please reset all the rainfall record when you reinstall your wireless 7-IN-1 sensor to other location Light Intensity LIGHT INTENSITY, UV INDEX & SUNBURN TIME 1. During light intensity mode, press and hold the SUN button for two (2) seconds to enter unit This section of display show the sunlight intensity, UV index and sunburn time. Press the [SUN] setting key to change the mode. 2. Press the UP or MODE: DOWN button to change the unit in sequence: Klux Kfc W/m².
Outdoor MAX temperature > outdoor MIN temperature > outdoor MAX humidity > outdoor MIN humidity > indoor* MAX temperature > indoor* MIN temperature > indoor* MAX humidity > indoor* MIN humidity > MAX average wind speed > MAX gust > MAX feels like temperature > MIN feels like temperature > MAX dew point > MIN dew point > MAX heat index > MIN heat index > MAX wind chill > MIN wind chill > MAX UV index > MAX light intensity > MAX relative pressure > MIN relative pressure > MAX absolute pressure > MIN absolute
40°C40°C 1% ~ 99% (current (current channel) Indoorchannel) Current Channel -40°C -40°C ~ 80°C ~ 80°C 40% Humidity Low Alert Indoor Indoor Temperature Temperature Low Low AlertAlert 0°C 0°C Average Wind Speed 0.1m/s ~ 50m/s Wind direction &/speed 17.
CARE AND MAINTENANCE BATTERY REPLACEMENT If the low battery indicator icon is displayed in the outdoor temperature and humidity section or the corresponding CH section of the LCD console display, this indicates that the batteries in your wireless weather sensor(s) are running low and should be replaced. Make sure to replace all batteries NANCE at the same time.
SPECIFICATIONS DISPLAY CONSOLE SPECIFICATIONS DISPLAY CONSOLE General Specifications Dimensions (W x H x D) 8.5″ x 6.9″ x 1″ (215 x 176.5 x 25.5 mm) Weight 1.1 lb. (503 g) (with batteries) Power source DC 5 V, 1 A adaptor Backup battery 3 x AAA 1.5 V batteries (alkaline recommended) Operating temperature range 23 °F ~ 122 °F (-5 °C ~ 50 °C) Wi-Fi® Communication Specifications 802.11 b/g/n Wi-Fi standard 2.
Sunny, Partly Cloudy, Cloudy, Rainy, Rainy / Stormy and Snowy Weather forecast Display modes Current Memory modes Historical data of past 24 hours, daily Max / Min Alarm Pressure change alert Indoor / Outdoor Temperature Display & Function Specifications Note: The following details are listed as they are displayed or operate on the console. Temperature unit °C and °F Display range -40 ~ 176 °F (-40 ~ 80 °C) 36 Outdoor Accuracy 131 °F ~ 140 °F ± 0.9 °F (55 °C ~ 60 °C ± 0.5 °C) 50 °F ~ 131 °F ± 0.
Display modes Current Memory modes Historical Data of past 24 hours, daily Max Rainfall display mode Hourly / Daily / Weekly / Monthly / Total rainfall Alarm High Daily Rainfall Alert UV Index Display And Function Specifications Note: The following details are listed as they are displayed or operate on the console. Display range 0 ~ 16 Resolution 0.
LIMITED WARRANTY TO ORIGINAL CONSUMER This Logia™ 7-in-1 Wireless Weather Station with Wi-Fi® and Solar Panel (“Product”), including any accessories included in the original packaging, as supplied and distributed new by an authorized retailer is warranted by C&A Marketing, Inc.
The Company does not warrant that the operation of the Product will be uninterrupted or error-free. The Company is not responsible for damage arising from your failure to follow instructions relating to its use.
LOGIA is a trademark of C&A IP Holdings, LLC, in the U.S. Android is a trademark of Google LLC. Apple and App Store are trademarks of Apple Inc. in the U.S. and other countries. IOS is a trademark of Cisco in the U.S. and other countries and is used under license. Microsoft, Windows, Windows Server, Windows Vista, and Windows 10 are trademarks of Microsoft Corporation in the U.S. and/or other countries. Wi-Fi, WPA, and WPA2 are trademarks of Wi-Fi Alliance in the U.S. and/or other countries.
