Product Info

Report No: CCISE191202301-V01
Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912023
No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road,
Bao’an District, Shenzhen, Guangdong, China
Telephone: [phone] Fax: [phone], E-mail: [e-mail] Page 54 of 171
Band2/RB#24
Front
18700
1860.0
23.12
0.12
23.5
0.612
1.091
0.668
Band2/RB#24
Back
18700
1860.0
23.12
-0.10
23.5
0.817
1.091
0.891
22
Band2/RB#24
Back
18900
1880.0
23.06
0.09
23.5
0.839
1.107
0.929
Band2/RB#24
Back
18900
1880.0
23.06
-0.07
23.5
0.832
1.107
0.921
Band2/RB#24
Back
19100
1900.0
23.08
0.15
23.5
0.824
1.102
0.908
Band4/RB#0
Front
20175
1732.5
23.18
0.13
23.5
0.562
1.076
0.605
23
Band4/RB#0
Back
20175
1732.5
23.18
0.28
23.5
0.684
1.076
0.736
Band7/RB#49
Front
20850
2510.0
24.15
-0.12
24.5
0.325
1.084
0.352
24
Band7/RB#49
Back
20850
2510.0
24.15
-0.09
24.5
0.467
1.084
0.506
ANSI / IEEE C95.1 – SAFETY LIMIT
Spatial Peak
Uncontrolled Exposure/General Population
1.6 W/kg (mW/g)
Averaged over 1g
 LTE 10MHz QPSK 50%RB Body SAR
Plot
No.
Band/Mode
Test
Position
CH.
Freq.
(MHz)
Ave.
Power
(dBm)
Power
Drift
(dB)
Tune-Up
Limit
(dBm)
Meas.
SAR
1g
(W/kg)
Scaling
Factor
Reported
SAR
1g
(W/kg)
Band5/RB#0
Front
20525
836.5
22.87
-0.02
23.0
0.252
1.030
0.260
25
Band5/RB#0
Back
20525
836.5
22.87
0.05
23.0
0.518
1.030
0.534
ANSI / IEEE C95.1 – SAFETY LIMIT
Spatial Peak
Uncontrolled Exposure/General Population
1.6 W/kg (mW/g)
Averaged over 1g
 LTE 20MHz QPSK 100%RB Body SAR
Plot
No.
Band/Mode
Test
Position
CH.
Freq.
(MHz)
Ave.
Power
(dBm)
Power
Drift
(dB)
Tune-Up
Limit
(dBm)
Meas.
SAR
1g
(W/kg)
Scaling
Factor
Reported
SAR
1g
(W/kg)
Band2/RB#0
Back
18700
1860.0
23.21
-0.03
23.5
0.805
1.069
0.861
26
Band2/RB#0
Back
18900
1880.0
23.15
0.16
23.5
0.844
1.084
0.915
Band2/RB#0
Back
18900
1880.0
23.15
0.12
23.5
0.836
1.084
0.906
Band2/RB#0
Back
19100
1900.0
23.01
-0.10
23.5
0.821
1.119
0.919
ANSI / IEEE C95.1 – SAFETY LIMIT
Spatial Peak
Uncontrolled Exposure/General Population
1.6 W/kg (mW/g)
Averaged over 1g
 WLAN 2.4 GHz Body SAR
Plot
No.
Band/Mode
Test
Position
CH.
Freq.
(MHz)
Ave.
Power
(dBm)
Power
Drift
(dB)
Tune-Up
Limit
(dBm)
Meas.
SAR
1g
(W/kg)
Scaling
Factor
D.C
Factor
Reported
SAR
1g
(W/kg)
2.4GHz/802.11b
Front
06
2437
14.91
0.07
15.0
0.075
1.021
1.02
0.078
27
2.4GHz/802.11b
Back
06
2437
14.91
0.06
15.0
0.130
1.021
1.02
0.135
ANSI / IEEE C95.1 – SAFETY LIMIT
Spatial Peak
Uncontrolled Exposure/General Population
1.6 W/kg (mW/g)
Averaged over 1g
Note:
1. Body-worn SAR testing was performed at 10mm separation, and this distance is determined by the handset
manufacturer that there will be body-worn accessories that users may acquire at the time of equipment certification, to
enable users to purchase aftermarket body-worn accessories with the required minimum separation.
2. Per KDB 941225 D06v02r01, when the same wireless modes and device transmission configurations are required for
testing body-worn accessories and hotspot mode, it is not necessary to test body-worn accessory SAR for the same
device orientation if the test separation distance for hotspot mode is more conservative than that used for body-worn
accessories.
3. Body-worn exposure conditions are intended to voice call operations, therefore GSM voice call is selected to be tested.
4. Per KDB 648474 D04v01r03, when the Reported SAR for a body-worn accessory measured without a headset
connected to the handset is ≤ 1.2 W/kg, SAR testing with a headset connected to the handset is not required.
5. The WLAN SAR perform the front and back position, due considered the simultaneous SAR for body-worn.
6. Per KDB 447498 D01v06, for each exposure position, if the highest output channel Reported SAR ≤0.8W/kg, other
channels SAR testing is not necessary.
7. Per KDB 865664 D01v01r04, for each frequency band, repeated SAR measurement is required when the measured
SAR is ≥0.8W/kg.