Operating instructions

DO
LBY DIGITAL
Dolby Digital can deliver surround sound with up to five discrete full-range channels: Left, Center, Right, Left Surround, Right Surround-plus a sixth
channel for powerful low-frequency effects. As it needs only about one-tenth the bandwidth of
the others, the LFE channel is referred to as a ".1"
channel (and sometimes erroneously as the "subwoofer" channel).
DSP – Digital Sound Processing
The SoundStage also incorporates a Digital Sound processor which manages the crossover technology between
the drivers & sub woofer, and allows
you to select the equalization (EQ) setting. The DSP can even match human perceived loudness curves, so that the SoundStage can deliver a fuller
sound even at very low volume levels. The SoundStage can be set to the following EQ’s - Live, Hall, Theater, Chorus or Matrix this lets you
experience movies at home with all the original dramatic sounds.
FM RADIO
The inclusion of an FM Radio is another integrated feature that this system offers. You can store up to 20 FM Freq
uencies, which are displayed on the
LED panel. Scanning and storage functions can all be administered via the remote control.
FRONT AND BACK PANEL
The Front panel of the SoundStage will allow you to control the following: unit on/off, input selection and
volume. The back panel is where you can
connect your external devices to the SoundStage. The SoundStage features the following inputs: Optical 1 & 2, Coaxial 1 & 2, Aux Right & Left, FM
Antenna.
MONO
Mono is where the audio is in the form of one channel, often centered in the sound field.
MUTE
Temporarily turns all audio being played through the speakers OFF unit the mute button is pressed again. The ‘MUTE’ button can be found on the
remote control.
POSITIONING THE UNIT
The SoundStage provides the same
effect as that of individual speakers placed around the room. No Need for numerous individual speakers and
cables as this all in one system produces the same surround sound effect.
PRODUCT SPECIFICATION
This all in one unit truly makes connectivity simple and is ready for use straight out the box. The SoundStage does away with the need for complicated
wiring and installation and has been designed for ease of use. The SoundStage features 2 optical, 2 coaxial and an analogue RCA input to connect
your TV, DVD or any other external device with this type of connectivity. The FM Antenna which is included allows users to enjoy crystal clear FM
reception.
REMOTE CONTROL
Convenient operation of the SoundStage 5.1 is assured thanks to its multi-functional remote control. Adjust the volume, input selection, FM radio
scanning and control all the desired sound options from the comfort of your armchair at the touch of a button.
SPEAKER VOLUME LEVEL SELECTION
The speaker volume levels can be individually controlled. Use the remote control to control the volume form these speakers : SW – Sub Woofer,
FR – Front Right
FL – Front Left
RR – Rear Right,
RL – Rear Left
SRS – Sound Retrieval System
The SoundStage 5.1 also incorporates SRS 3D technology - this widens the area of sound so that the music is not concentrated in one small area and
makes it sound more as if you were listening to it in an open environment. Furthermore it is designed to lift the sound up near your head level, SRS
brings out the higher end, providing more clarity and detail, as well as a more realistic listening experience.
STEREO
Stereo is the reproduction of sound, using two or more independent audio channels, through a symmetrical configuration of loudspeakers, in such a
way as to create a effective impression of sound heard from various directions, as in its natural hearing.
VOLUME SELECTION
Adjust the complete volume level of the SoundStage to your personal preference, the volume ranges from 00 to 63 and can be altered via the remote
control or the front panel.
GLOSSARY
Page 7