Installation Instructions

v3.10 CaretakerSentry® 11
[Voice prompt 2 – Spanish]
[Voice prompt 3 – French]
4. Enter “#” (to exit programming mode)
[Voice prompt –Programming complete]
5. Slide Programming Switch to “Normal Operation”
Option #1 – Dial 9 Before Number - Dials ‘9’ to get an outside line.
1. Enter (Passcode) – XXXX then “
**
” (Default is 1234)
[Voice prompt – Option Mode]
2. Enter – 1
[Voice prompt – Dial 9 before number,
1 for YES – 3 for NO]
3. Enter either 1 or 3
[Voice prompt 1 – YES]
[Voice prompt 3 – NO] – FACTORY SETTING
4. Enter “#” (to exit programming mode)
[Voice prompt – Programming complete]
5. Slide Programming Switch to Normal Operation
[Voice prompt – “Emergency Call Mode”]
Option #2 – Alarm Communication Protocol – selects communication language with central station
1. Enter (Passcode) – XXXX then “
**
” (Default is 1234)
[Voice prompt – Option Mode]
2. Enter – 2 [Voice prompt – Alarm Communication Protocol],
1 for CONTACT ID - FACTORY SETTING
2 for 4+2
3. Enter either 1 or 2
[Voice prompt 1 – CONTACT ID] [Voice prompt 2 – 4+2]
4. Enter “#” (to exit programming mode)
[Voice prompt – Programming complete]
5. Slide Programming Switch to “Normal Operation”
[Voice prompt – “Emergency Call Mode”]
Option #3 -- Dial *82 Before the Number - Displays unblocked Caller ID information from the caller for this
call only.
1. Enter (Passcode) – XXXX then “
**
” (Default is 1234
[Voice prompt – Option Mode]
2. Enter – 3[Voice prompt – Dial *82 before number,
1 for YES – 3 for NO]
3 .Enter either 1 or 3
[Voice prompt 1 – YES]
[Voice prompt 3 – NO] – FACTORY SETTING
4 .Enter “#” (to exit programming mode)
[Voice prompt – Programming complete]
5. Slide Programming Switch to Normal Operation
[Voice prompt – “Emergency Call Mode”]
Option #4 – DEMO/Tradeshow Mode – THIS MODE IS FOR DEMO MODE ONLY FOR SALESPERSONS.
This feature is used to DEMO the unit without having access to a telephone line. Use this feature with a Viking