User's Manual

You may wish to use your TV with Sky Digital.
There are a number of connection options, the best being connecting via SCART cable.
Connecting via SCART
1) Connect the SCART cable from the Sky Digital Box to SCART of the TV
2) Press [SOURCE]
3) Press [\/] or [/\] to select SCART
4) Press [OK]
The channel your Sky Digital box is displaying will now be shown on the TV.
You may wish to share your Sky Digital signal around the home by using an RF connection.
If this TV is to be connected in this way, please follow the below.
Connecting via RF
Ensure the Sky signal is switched on, before you start the below.
1) Connect the RF cable from the RF output socket of the sky/cable box to the ‘RF IN’ of the TV.
2) Press [MENU] to enter menu
3) Press [\/] to select TV Menu
4) Press [>] to enter Menu
5) Press [\/] to highlight Channel
6) Press [>] to enter Channel menu
7) Press [>] to highlight Analogue Fine Tuning
8) Select the channel you wish to use using [\/]
9) Press [OK]
10) Press [>] or [<] to adjust the frequency. When you stop the channel will be saved.
Video
Audio
TV
TV
Setup
Parental
OK
EXIT
OK
Select
Exit
Country
Audio Language
Channels
Auto Scan
Update Scan
CI
Germany
English
MENU
Back
43
Using with Sky Digital
Manually tune until you locate the Sky channel. If it stops press [>] again and the search
will continue. (Often, the frequency required is 847.25 mhz, depending on which model
of Sky Set top box)
Once tuned in it will go back to TV
Satety WarningsIntroducing the LCD TVInstalling the LCD TVUsing The FeaturesTroubleshootingSpecifications
new logik style english manual 4Page 1 4. 7. 2008 13:46:11