Datasheet

www.LogiLink.com
LogiLink
®
Adapter USB to D-SUB 25-Pin Parallel
Art No. UA0054
The USB-Parallel cable allows your PC to print to any parallel printer or
device connected through the USB port. Just plug the USB connector
of the cable into the USB port of your PC and the other end
into the centronics connector of the parallel printer. USB (Universal
Serial Bus) interface provides up to 12 Mbps data throughput, so
printing is much faster compared when connected to standard par-
allel port. The USB- Parallel cable also provides true plug-n-play
and hot-plug capability - simply plug in the cable under the Windows
operating system and the cable will be instantly detected.
Features
● Adapter for D-SUB 25-Pin signals used with usb devices
● PNP peripheral for IBM PC connection to many of most printers
● Fully compatible with USB spec. Ver. 1.1
● Fully compatible with USB printer device classic spec
● Supports: ECP & EPP mode
● Bus power support (from PC USB host port via connection cable)
● Max.throughout : 1.2 Mbytes/ sec (EPC mode)
● Cable length: 1,8 meter