User's Manual




LT‐D‐0211rev16

Page|63


6.4.11 “Detection”Tab 
The Detectiontabshowsa listof tagsreceivedby all Base‐Stationscurrently connected (andselected)
withtheTechnician‐Stationsoftware.
DetectedTagsList
Theinformationshowninthelistofdetectedtags:
 Count–Thenumberofmessagesreceivedfromatagincurrentsession
 Time–Timeanddateoflastmessagereceived
 Tag–IDofthetagbeingreceived
 Description–Ifthetagisenrolledwithanasset,theassetdescriptionisdisplayed.
 Location–Showsthereasonoftransmissionofthetag.
o Tagtransmittedbecauseit wasexcitedwhenlocatednearoneoftheLF‐Antennas (RF‐
Zones),theantennanamewillbedisplayed
o Tag transmitted because of sensor, button or external input. The exact reason will be
displayed.
 Tamper–ShowsTrueifthetag’sTampersensorreportedatamperevent
 Motion‐ShowsTrueifthetag’sMotionsensorreportedatamperevent
 Input‐ShowsTrueorFalseifthetagtransmittedduetoanevenintheexternalinputport.Ifthe
currentstatusisON,theindicationisTrue,otherwiseFalse.
 Key1–Key3–IndicatedTrueifabuttonwaspressedonthetag.
 TemperatureAlarm–Ind icate dTrueifathresholdsetinthetagwasexceeded
 Temperature–Showsmeasuredtemperatureinthetag’ssensor
 TagBattery–Thetagindicatesitsbatterystatuswitheachtransmission



ToFilterSelectedTagsandManageFilteredLists