User's Manual Part 1

8 English
Getting started with

If you are using the red and white stereo connectors of the PS3 AV cable to connect
your PS3 to your primary audio system, use the following wireless base station setup or
the alternative on page 9
Recommended setup for the wireless base station (Fig. 2)
Unplug the red and white connectors of the PS3 AV cable from your primary 1.
audio system
Plug these red and white connectors directly into the Logitech RCA-to-RCA 2.
passthrough cable connectors
Plug the male connectors of the Logitech RCA-to-RCA passthrough cable to 3.
your primary audio system (where the PS3 AV cable was previously connected)
On the other end of the Logitech RCA-to-RCA passthrough cable, plug the red 4.
and white connectors into the PS3 ports on the back of the wireless base station.
Figure 2
Xbox 360
Xbox 360
Logitech wireless base station
Primary audio system
Logitech RCA-to-RCA
passthrough cable
PS3
PS3 AV cable