G502 HERO Setup Guide Guide d’installation
1 2 3 On USB You can customize the three onboard profiles of the G502— button programming, lighting color, lighting effects, and tracking behavior—using the Logitech Gaming Software. Download this free software and learn how to customize the G502 at www.logitechG.com/support/g502-hero Your G502 is ready to play games. If you would like to customize your G502, refer to the next section.
4 4 English To adjust the weight and balance of your G502, first open the weight door by grasping the mouse firmly in your right hand and pulling the tab down with your left thumb.
5 You can place up to five 3.6 gram weights in a number of different orientations. Experiment with different positions for the weights to find an overall weight and balance that feels right for you.
6 6 English After inserting the weights, close the weight door by inserting the tabs on the weight door into the slots on the left side of the mouse and rotating the door down until the magnet holds the weight door firmly closed.
11 fully programmable buttons 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
DPI values Default DPI value DPI Shift value Reports/sec 1 2 3 8 English Profile 1* (High-DPI gaming) Profile 2* Profile 3* (Low-DPI gaming) (Standard: unshifted) Profile 3* (Standard: G-shifted) 1200, 2400, 3200, 6400 2400 400, 800, 1600, 2400 1600 2400 2400 2400 2400 1200 1000 Button 1 (left click) Button 2 (right click) Button 3 (middle click) 400 1000 Button 1 (left click) Button 2 (right click) Button 3 (middle click) N/A 500 Button 1 (left click) Button 2 (right click) Button 3 (middle c
Profile 1* (High-DPI gaming) Profile 2* Profile 3* (Low-DPI gaming) (Standard: unshifted) Profile 3* (Standard: G-shifted) Button 4 (back) Button 5 (forward) DPI Shift (sniper) Ctrl-Shift-Tab Ctrl-Tab 6 Button 4 (back) Button 5 (forward) DPI Shift (sniper) 7 8 9 10 11 DPI Down DPI Up Scroll left Scroll right Next profile DPI Down DPI Up Scroll left Scroll right Next profile 4 5 Button 4 (back) Button 5 (forward) G-Shift (double functions) Ctrl-C Ctrl-V Scroll left Scroll right Next profile N/A C
Onboard profiles The G502 has three preconfigured profiles, one each for high sensitivity gaming, low sensitivity gaming, and standard mouse usage. Use Button 9 (see mouse drawing) to rotate through these default profiles. When you change profiles, the DPI indicator lights will change color to blue for three seconds and will indicate the new mode as shown here: DPI indicators DPI values are shown using the three LEDs indicated in the mouse drawing.
Hyperfast Scroll Wheel The G502 features Logitech’s exclusive dualmode hyperfast scroll wheel. Click the button right below the wheel (Button G12) to switch between the two modes. Tips Weight and balance tuning is very much an exercise in personal preference. Generally speaking, more weight makes it easier to control high DPI settings, while less weight makes low-DPI gaming less fatiguing.
If the mouse doesn’t work • Unplug and re-plug the USB cable to ensure a good connection. • Try the mouse USB cable in another USB port on the computer. • Use only a powered USB port. • Try rebooting the computer. • If possible, test the mouse on another computer. • Visit www.logitechG.com/support/g502-hero for more suggestions and assistance.
