G604 SETUP GUIDE GUIDE D’INSTALLATION
SETUP INSTRUCTIONS 1 Remove the battery cover by lifting upward the back of the cover. 1 2 Insert the battery. 2 3 Remove the receiver.
4 Close the battery cover. 4 5 Make sure the switch on the bottom of the mouse is in the on position. 5 6 Recommended: Insert receiver into the receiver extension cable. Insert extension cable into your USB port. Alternatively, insert receiver directly into your USB port. 6 7 (Optional) Download Logitech G HUB software to access advanced features. Download at logitechG.
Tips: • To make your mouse lighter, a lithium AA battery (not included) can be used. • G604 has a wireless range of up to 10 meters. To ensure optimal performance in noisy wireless environments, it is recommended to keep the receiver within 20 cm of the mouse. • Keep the mouse and receiver 2 m+ away from wireless routers or other 2.4 GHz wireless devices to minimize environmental noise.
15 FULLY PROGRAMMABLE CONTROLS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Main click Secondary click Wheel click DPI up DPI down Scroll up Scroll right Scroll down Scroll left Button G4 - Default: DPI shift Button G5 - Default: Backward Button G6 - Default: Forward Button G7 - Default: 3 Button G8 - Default: 2 Button G9 - Default: 1 1 3 4 5 9 14 15 12 2 6 7 8 13 10 11 Programmable controls can be changed using Logitech G HUB software.
NON-PROGRAMMABLE CONTROLS 16 Wheel mode toggle button 17 LIGHTSPEED / Bluetooth toggle button 18 ON/OFF button 16 17 18 7 ENGLISH
BLUETOOTH® / LIGHTSPEED DUAL CONNECTIVITY Out of the box, your mouse and LIGHTSPEED receiver are paired. 5 sec. To pair to a Bluetooth-enable computer: Step 1: P ress the connectivity button for 5 seconds until the LED indicator flashes blue quickly. Step 2: Go to the Bluetooth settings of your computer Step 3: Click “Add a Bluetooth Device” and select “G604 Gaming Mouse” The color of the LED indicator will turn solid blue for 5 seconds when your mouse and computer are successfully paired.
LED INDICATOR LOGITECH G HUB SOFTWARE Battery life Flashing red: battery <15% You can customize the onboard profile settings using the Logitech G HUB Software. These settings include button programming, report rate and tracking behavior. G604 allows up to 5 onboard DPI settings.
