G903 SE LIGHTSPEED Wireless Gaming Mouse Souris gaming sans fil LIGHTSPEED SETUP GUIDE | GUIDE D’INSTALLATION
SETUP INSTRUCTIONS 1 1 Remove the protective film on the bottom side of the mouse before use. This film is designed to protect the sensor from dust during transport, and your mouse may not function unless this is removed. 2 A wireless receiver, USB adapter, and optional 10g weight can be found in the accessory box. Plug one end of the cable into your PC, and the other end into the USB adapter and receiver. 2 –– The receiver can also be used plugged directly into your PC.
4 4 To charge, disconnect the cable from the adapter and plug into the front of the mouse. Your mouse will operate in data‑over-cable mode whenever it is plugged in directly to a PC. Full charge from empty requires approximately two hours plugged in to a PC USB port. Tips: –– Keep the mouse and receiver 2 m+ away from wireless routers or other 2.4GHz wireless devices to minimize environmental noise. 2 m+ –– G903 SE has a wireless range of up to 10 meters.
BUTTON CONFIGURATIONS G903 SE comes with replaceable buttons and button caps, which are held onto the mouse magnetically. These should be stored in box when not in use.
11 FULLY PROGRAMMABLE BUTTONS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 2 1 Left (Button 1) Right (Button 2) Wheel click (Button 3) Back (Button 4) Forward (Button 5) Back (Button 6) Forward (Button 7) Scroll left (wheel tilt left) Wheel mode shift (not programmable) DPI Down (Button -) Scroll right (wheel tilt right) DPI Up (Button +) On/Off switch (bottom of mouse, not programmable) Profile Select (bottom of mouse, not programmable) Weight door 8 11 3 9 5 10 12 6 4 13 14 15 6 ENGLISH 7
BATTERY LIFE G903 SE has a rechargeable 720mAH LiPol battery which provides it with up to 32 hours non-stop gaming at 1ms report rate with lights off, or 24 hours non-stop gaming at 1ms report rate with RGB color cycling on.* –– Charge level can be checked when the mouse is powered on or using Logitech Gaming Software to assign a button to check charge level.
CHARGING/DATA OVER CABLE RGB PROGRAMMABLE LIGHTING Plug your mouse in via the provided USB charging cable when the battery is low. G903 SE is also compatible with the Logitech G POWERPLAY wireless charging system, sold separately. G903 SE has two lighting zones 1 DPI indicators 2 G logo These colors can be customized using Logitech Gaming Software to a variety of breathing, color cycling, or solid color modes.
LOGITECH GAMING SOFTWARE HYPERFAST SCROLL WHEEL You can customize the 5 onboard profiles of the G903 SE using the Logitech Gaming Software. These settings include surface tuning, button programming, lighting color, lighting effects, report rate, and tracking behavior. G903 SE allows up to 5 DPI settings per profile. By default, G903 SE has 1 active onboard profile with the following settings: –– DPI: 400/800/1600/3200/6400 G903 SE features Logitech’s exclusive dual-mode Hyperfast scroll wheel.