User Manual
To edit a multi key macro
edit_multi_key_macro.htm[9/10/2014 11:03:41 AM]
To edit a multi key macro
1. Within the Logitech
®
Gaming Software, in the Profiles View with the correct profile selected in the Profiles area, and with the
correct macro mode selected, do one of the following:
Double-click the multi key macro command in the Commands area .
Right-click the multi key macro command in the Commands area, or click its arrow, and select Edit.
Right-click the G-key/button in the Image area that has been assigned the command, or click its arrow, and select
Edit.
The Command Editor dialog box is displayed with the multi key macro's details shown.
2. Make the changes you want to it:
To... Do this...
change the name of the macro... simply type the new Name.
record additional events... right-click an item and select either Record Before Here or Record After
Here, then record more macro events and click Stop Recording when you've
finished.
include the time you spend between
keystrokes...
check the Record delays between events box. If you want the macro to run as
fast as possible, leave this box unchecked.
show the name of the macro while its
running on your device's display...
if your device has an LCD, check the Display macro name on the GamePanel
display box.
remove a single keystroke event... right-click it in the Keystrokes list, and select Delete.
insert a half-second delay... right-click the event before which you want the delay, and select Insert Delay.
A 0.5 second delay is added, which you can increase or decrease if necessary.
change a delay's time... right-click it in the Keystrokes list, select Edit, and change the delay amount.
insert a mouse event... right-click it in the Keystrokes list, and select Insert Mouse Event and choose
the event you want to insert. You can insert button down, button click and
button up events for the mouse's left button, right button, middle button, and
extra button, as well as for the mouse wheel roll forward, roll backward, and
click.
change the command's repeat
settings...
select one of the following:
None if you do not want it to repeat.
While pressed to make the it repeat as long as you hold down the
G-key/button.
Toggle to make it repeat automatically when you press the
G-key/button, and only stop when you press the G-key/button again.
3. Click OK to store the multi key macro and close the Command Editor dialog box.