FLIGHT MULTI PANEL Professional Autopilot Cockpit Simulation Controller Contrôleur de pilotage automatique pro pour simulateur de cockpit USER GUIDE | GUIDE DE L’UTILISATEUR logitechG.
3 ENGLISH 8 FRANÇAIS 13 ESPAÑOL 18 PORTUGUÊS 3
INTRODUCTION The Multi Panel interacts with Microsoft Flight Simulator X to control a range of functions, including auto pilot settings, flaps and trim controls.
INSTALLATION Fix the Multi Panel to the supplied mounting bracket. Insert the screws through the holes at the corners of the Panel into the bracket behind and tighten. If you already own a Logitech G Flight Yoke System, you can mount the Panel and bracket on top of the Yoke unit using the screws provided. 1 2 3 INSTALLATION FOR WINDOWS® 10, WINDOWS® 8.1 AND WINDOWS® 7 DRIVER INSTALLATION 1 Visit logitech.com/support/multi-panel to download the latest drivers and software for your operating system.
USING THE LOGITECH G FLIGHT MULTI PANEL Button AP HDG NAV IAS ALT VS APR REV Autopilot function Master switch to engage or disengage the autopilot Plane will fly to selected compass heading Plane will fly to selected NAV1 frequency or GPS Plane will fly at selected indicated airspeed Plane will fly to and maintain selected altitude Plane will climb or descend at selected vertical speed Plane will fly on approach to runway localizer Plane will fly on a back course from the localizer ADJUSTING AUTOPILOT SE
It is possible to use each of the autopilot functions individually but more common to use a combination of functions. For example, if you wanted to fly at 20,000 feet at a speed of 150 knots on a heading of 210 degrees, first select the ALT function with the selector knob on the left and adjust altitude to 20,000 with the right rotary controls. Next, turn the function selector knob to IAS and adjust speed to 150. Now turn the function selector to HDG and adjust heading to 210.
