CLOSER TO REALITY WITH SAITEK’S PRO FLIGHT RANGE YOUR COMPLETE COCKPIT SOLUTION // FIP DIGITAL LCD DISPLAY YOKE SYSTEM AND QUADRANT PERFECT PARTNERS TPM THROTTLE/PROP.
ENGLISH INTRODUCTION 4 INSTALLATION 5 TROUBLESHOOTING 6 FRANÇAIS DÉMARRAGE 9 INSTALLATION 10 DÉPANNAGE 11 DEUTSCH ERSTE SCHRITTE 15 INSTALLATION 16 FEHLERBEHEBUNG 17 ITALIANO AVVIO 20 INSTALLAZIONE 21 RISOLUZIONE PROBLEMI 22 ESPAÑOL PRIMEROS PASOS 25 INSTALACIÓN 26 RESOLUCIÓN DE PROBLEMAS 27
INTRODUCTION The Switch Panel features realistic switches and controls which interact in real time with Microsoft Flight Simulator X to make your flying experiences more realistic.
You can fix the Switch Panel to your desk using the velcro strips. If you already own a Saitek Pro Flight Yoke System, you can also mount the Switch Panel on top of the Yoke unit using the screws provided. Important: To fix the Pro Flight Switch Panel to the Pro Flight Yoke System, first remove the Switch Panel from the mounting bracket, screw the bracket to the top of the Yoke System and then reattach the Switch Panel to the front of the bracket.
from Saitek.” Click yes, then click Next. 2. After installation, you have the option to Run Profile Editor, which will show you the programming environment. To skip the Profile Editor now, uncheck the box and click Finish to complete installation. TROUBLESHOOTING Once you have installed the Switch Panel software, the Switch Panel buttons and controls should be automatically configured to control their functions in FSX software.
Submit a Ticket at http://support.madcatz.com Call the Mad Catz Tech Support Center nearest you: North America: 1-800-659-2287 (USA) or 1-619-683-2815 (outside USA) United Kingdom: 01633 928072 Europe (outside UK): +44(0) 1633 883110 France: 01 82 88 01 80 Germany: 089-21094818 Spain: 93 181 63 94 Once you have your unique Return Authorization Number, do the following: 1. Ship the product to Mad Catz at your expense for service. 2. Enclose a copy of the original sales receipt showing a purchase date. 3.
mitter. IC RF Exposure Statement: The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.
Ce panneau de contrôle vous apporte des interrupteurs et contrôles réalistes qui interagissent en temps réel avec le logiciel Microsoft Flight Simulator X pour rendre vos expériences de vol plus réalistes.
INSTALLER LE SWITCH PANEL Vous pouvez fixer le panneau de contrôle sur votre bureau en utilisant les bandes velcro. Si vous possédez déjà un Pro Flight Yoke System de Saitek, vous pouvez également fixer le panneau de contrôle sur le dessus de votre yoke en utilisant les visses fournies.
1. À l’écran Configuration du logiciel, cliquez sur Suivant, une fenêtre pop-up vous demandera si vous « souhaitez faire confiance au logiciel de Saitek. » Cliquez sur oui, puis sur Suivant. 2. Après l’installation, vous avez la possibilité d’Exécuter l’éditeur de profil, qui vous montrera l’environnement de programmation. Pour passer l’Éditeur de profil maintenant, décochez la case et cliquez sur Finir pour terminer l’installation.
Européens. Votre recours exclusif est la réparation ou le remplacement de votre produit Mad Catz. En aucun cas la responsabilité de Mad Catz ne pourra dépasser le prix d’achat d’origine du produit. Cette garantie ne s’applique pas à : (a) une usure normale ou un mauvais usage ; (b) une utilisation industrielle, professionnelle ou commerciale ; (c) un produit ayant fait l’objet de modifications. AMÉRIQUE DU NORD ET EUROPE Pour bénéficier de la garantie, vous devez : 1.
Téléphone pour l’Europe (en dehors du Royaume-Uni) : du lundi au vendredi (sauf jours fériés) au +44(0) 1633 883110. - N’utilisez cette unité que dans le but pour lequel elle a été conçue. - Pour prévenir tout risque d’incendie ou de choc électrique, n’exposez pas cette unité à la pluie ou à l’humidité. Ne l’utilisez pas à moins de 9 mètres de l’eau (par exemple une piscine, une baignoire ou un évier). - Pour éviter tout risque de choc électrique, ne démontez pas cette unité.
rayonnement établies dans le cadre d’un environnement non contrôlé. Cet émetteur ne doit pas être combiné à ou fonctionner simultanément avec une autre antenne ou un autre émetteur. Déclaration d’IC relativement aux radiofréquences : Cet appareil répond aux exigences lui permettant d’être exempté des limites de l’évaluation de routine exposées à la section 2.5 de la norme RSS 102 et est conforme aux limites d’exposition aux RF établies par la norme RSS-102.
ERSTE SCHRITTE Das Switch Panel verfügt über realistische Schalter und Bedienelemente, die in Echtzeit mit Microsoft Flight Simulator X interagieren und Ihnen somit ein noch realistischeres Flugerlebnis bieten.
INSTALLATION DES SWITCH PANEL Sie können die Konsole mit den Klettbändern auf Ihrem Schreibtisch befestigen. Falls Sie bereits ein Saitek Pro Flight Yoke besitzen, können Sie das Switch Panel auch mithilfe der mitgelieferten Schrauben oben auf dem Yoke-System befestigen.
SOFTWARE-INSTALLATION TESTEN DES SWITCH PANEL Zum Testen des Switch Panel klicken Sie auf Windows Start, Verzeichnis Saitek Pro Flight Switch Panel und wählen Sie danach die Pro Flight Switch Panel Testseite aus. FEHLERBEHEBUNG Nach Installation der Switch Panel Software sollten die Schalter und Bedienelemente des Switch Panel automatisch zur Steuerung der entsprechenden Funktionen in der FSX-Software konfiguriert sein.
Authorization Number) vom technischen Support von Mad Catz an: a. Übermitteln Sie auf http://support.madcatz.com ein Ticket. b.
- Führen Sie, mit Ausnahme der zulässigen Elemente, keine Gegenstände jeglicher Art in das Gerät ein, da sie gefährliche Spannungspunkte berühren oder einen Kurzschluss auslösen können, was zum Ausbruch von Feuer oder elektrischem Schock führen kann. Wenn Sie sich müde oder unwohl fühlen oder Schmerzen in Ihrer Hand oder Ihrem Arm haben, beenden Sie unverzüglich die Verwendung der Einheit. Suchen Sie einen Arzt auf, wenn sich Ihr Zustand nicht bessert.
AVVIO Lo Switch Panel è dotato di realistici switch e controlli che interagiscono in tempo reale con Microsoft Flight Simulator X per rendere più realistiche le vostre esperienze di volo.
INSTALLAZIONE DELLO SWITCH PANEL Potete fissare il panello alla scrivania usando le strisce di velcro. Se possedete già una cloche Saitek Pro Flight Yoke System, potete anche montare lo Switch Panel sopra alla cloche usando le viti fornite. Importante: per fissare lo Switch Panel alla cloche Pro Flight, per prima cosa rimuovete la staffa di montaggio dello Switch Panel, avvitate la staffa alla parte superiore della cloche e poi riattacate lo Switch Panel di fronte alla staffa.
INSTALLAZIONE DEL SOFTWARE 1. Nella schermata Software Setup (Installazione software) fare clic su Next (Avanti) e una casella pop-up chiederà se si desidera considerare attendibile il software proveniente da Saitek. Fare clic su yes (sì), quindi su Next (Avanti). 2. Dopo l’installazione, viene visualizzata l’opzione Run Profile Editor (Esegui Editor profili), che visualizzerà l’ambiente di programmazione.
garantisce solo ed esclusivamente la riparazione o la sostituzione del prodotto. In nessun caso, la responsabilità di Mad Catz sarà superiore al prezzo di acquisto originale del prodotto. Questa garanzia non viene applicata nei seguenti casi: (a) normale usura o uso non corretto; (b) uso industriale, professionale o commerciale; (c) se il prodotto è stato manomesso o modificato. NORD AMERICA ED EUROPA Per ricevere assistenza in garanzia, occorre: a. b. - Inviando un ticket all’indirizzo http://support.
distanza minima di 10 m dall’acqua (piscine, vasche e lavelli). - Non smontare per evitare scosse elettriche. Eventuali riparazioni vanno eseguite da personale qualificato. - Non inserire nel prodotto oggetti, se non quelli previsti, per evitare che raggiungano punti con tensioni pericolose o che causino un cortocircuito con conseguenti scosse elettriche e incendio. - In caso di stanchezza, pesantezza o dolore alle gambe e/o alle piedi durante l’utilizzo del videogioco, sospendere immediatamente l’uso.
PRIMEROS PASOS El Panel Conmutador consta de conmutadores y controles prácticos que interactúan en tiempo real con el Simulador de Vuelo X Microsoft para que sus experiencias de vuelo sean más realistas.
COMO INSTALAR EL PANEL CONMUTADOR Puede acoplar el panel a su escritorio utilizando las tiras de velcro. Si ya tiene un Sistema Yoke Pro Vuelo de Saitek, también puede montar el Panel Conmutador encima de la unidad del Yoke utilizando los tornillos proporcionados.
INSTALACIÓN DEL SOFTWARE 1. En la pantalla Instalación del software, haz clic en Siguiente y un cuadro emergente te preguntará si “deseas confiar en el software de Saitek.” Haz clic en sí, y a continuación en Siguiente. 2. Tras la instalación, puedes Ejecutar el editor de perfiles, que te mostrará el entorno de programación. Para saltarte ahora el Editor de perfiles, desactiva la casilla y haz clic en Finalizar para completar la instalación.
exclusivamente a usted, el comprador original, y no podrá traspasarse a otra persona. Si se presenta algún defecto cubierto por esta garantía Y presenta comprobante de compra, Mad Catz, a su criterio, reparará o repondrá el producto sin cargo alguno. La garantía limitada de dos (2) años de Mad Catz sólo se aplica a los compradores de Norteamérica y Europa. El único remedio que se ofrece es la reparación o reposición del producto de Mad Catz.
Teléfono España: de lunes a viernes (con excepción de los días festivos), 93 181 63 94. Teléfono Reino Unido: de lunes a viernes (con excepción de los días festivos), 01633 928072. Teléfono Europa (fuera del Reino Unido): de lunes a viernes (con excepción de los días festivos), +44(0) 1633 883110. - Use este equipo únicamente del modo previsto. - Para evitar riesgo de incendio o de descarga eléctrica, no exponga este equipo a la lluvia ni a la humedad.
©2015 Mad Catz, Inc. 10680 Treena Street, Suite 500, San Diego, CA 92131 U.S.A. Mad Catz, Saitek, the Pro Flight logo, the Saitek logo and the Mad Catz logo are trademarks or registered trademarks of Mad Catz Interactive, Inc., its subsidiaries and affiliates. The shape and design of this product are a trade dress of Mad Catz Interactive, Inc., its subsidiaries and affiliates. Microsoft, Windows, and the Windows logos are trademarks of the Microsoft group of companies.