FLIGHT THROTTLE QUADRANT Professional Axes Levers Simulation Controller Leviers d’axe pour simulateur pro USER GUIDE | GUIDE DE L’UTILISATEUR logitechG.
GETTING STARTED : QUADRANT LEVER KNOBS Detachable lever knobs to configure any combination of throttle, flaps, mixture or prop pitch LEVERS Smooth-travel levers with 0 button detent THREE 2-WAY ROCKER SWITCHES 4 English
INTRODUCTION Congratulations on buying the Logitech G Flight Throttle Quadrant. The Flight Quadrant features realistic controls configurable for all the major flight simulation software to make your flying experiences more realistic. INSTALLING THE THROTTLE QUADRANT First, screw the clamp to the throttle quadrant using the four screws provided.You can screw the clamp to one of two sides of the quadrant depending on how you want to mount the quadrant - either in front and below your table or on top of it.
INSTALLATION FOR WINDOWS® 10, WINDOWS® 8.1 AND WINDOWS® 7 DRIVER INSTALLATION 1 Visit logitech.com/support/throttle-quadrant to download the latest drivers and software for your operating system. 2 With device disconnected, follow the onscreen instructions to complete the installation. 3 At the Driver Setup screen, only when prompted, insert USB cable into one of your computer’s USB ports, then click Next. 4 At the Driver Setup screen, click Next to test your controller.
IMPORTANT INFORMATION DRIVER UPDATES From time to time there may be updates to the driver and programming software for this product. You can check for the latest software updates by visiting the Logitech website (support.logitech.com) ENABLING YOUR CONTROLLER IN THE GAME Most games support game controllers, but typically default to the mouse and keyboard until you go into the option menu within the game.
When you access the Assignments/Controls screen in Flight Simulator, ensure that the Logitech G Flight Throttle Quadrant is selected in the option labeled Joystick Type. Now select Joystick Axes (Flight Simulator 2004) or Control Axes (Flight Simulator X) at the top of the window. Once you have done this, simply find the command that you want to assign to your controller from the list of commands, click it and then click the Change Assignment button.