User's Manual

4
Cordless Wheel Mouse Maintenance
Cursor Enhancement in Windows 3.1x
Use the Logitech Cursor Enhancement dialog box to customize the cursor. To display
the dialog box, click the Cursor... button in the MouseWare Control Center.
Button Assignments in Windows 3.1x
MouseWare allows you to assign functions to three mouse buttons and replaces
frequently used tasks, such as Double-Click, DragLock, etc., to a single button click.
To override a button assignment temporarily so you can use an application-specific
feature, press the Control key while clicking the button to be overridden.
Cordless Wheel Mouse Maintenance
If the cursor skips or moves abnormally, clean the ball
of your cordless wheel mouse.
1. Remove the retainer ring. On the bottom
of the cordless wheel mouse, twist the retainer ring
counter clockwise to remove it.
2. Remove the ball and wipe it with a clean, lint-
free cloth, then blow carefully into the ball-
cage to dislodge dust and lint. Look for a build-up
of dirt on the rubber roller(s) inside the ball-cage.
3. If dirty, clean the roller(s) using a cotton swab
moistened lightly with isopropyl (rubbing)
alcohol. After cleaning, make sure the roller(s) are still
centered in their channels. Make sure that fluff from the swab is not left on the roller(s).
4. Replace the ball and retainer ring.
Displays the cursor in normal
or reverse video
Changes the pointing
direction of the cursor
Sets cursor size
Leaves trail behind cursor as
it moves*
Makes the cursor grow larger as
it moves across the screen**
Sets the speed the cursor must move
to change size**
Sets the time the cursor stays large
before it shrinks in size**
Controls tracker icon at the bottom
of screen
Causes tracker icon to point to cursor
as it moves
Places the tracker icon on top
of all applications
Retains position of tracker icon
upon exiting
* Disabled with some SVGA resolutions.
**Disabled if Size is set to Large.
Ball
Inside roller
Retainer ring
Ball-cage