Quick Start Guide

ManualsBrandsLogitech ManualsComputer PeripheralsMX Keys Wireless Keyboard

Getting Started

QUICK SETUP

For quick interactive setup instructions, go to the interactive setup guide.

For more detailed information, continue with the following detailed setup guide.

DETAILED SETUP

1. Make sure the keyboard is turned on.

The number 1 LED on the keyboard should blink quickly.

NOTE:If the LED is not blinking quickly, perform a long press (three seconds).

2. Choose how you want to connect:

Use the included wireless receiver.

Plug the receiver into a USB port on your computer.

Connect directly via Bluetooth.

Open the Bluetooth settings on your computer to complete the pairing.

Clickherefor more details on how to do this on your computer. If you experience issues with

Bluetooth, clickherefor Bluetooth troubleshooting.

3. Install Logitech Options Software.

Download Logitech Options to enable additional features. To download and learn more go

tologitech.com/options.

LEARN MORE ABOUT YOUR PRODUCT

Product Overview

Summary of content (6 pages)

PAGE 1
Getting Started QUICK SETUP For quick interactive setup instructions, go to the interactive setup guide. For more detailed information, continue with the following detailed setup guide. DETAILED SETUP 1. Make sure the keyboard is turned on. The number 1 LED on the keyboard should blink quickly. NOTE: If the LED is not blinking quickly, perform a long press (three seconds). 2. Choose how you want to connect: Use the included wireless receiver. Plug the receiver into a USB port on your computer.
PAGE 2
1 - PC layout 2 - Mac layout 3 - Easy-Switch keys 4 - ON/OFF switch 5 - Battery status LED and ambient light sensor Pair to a second computer with Easy-Switch Your keyboard can be paired with up to three different computers using the Easy-Switch button to change the channel. 1. Select the channel you want and press and hold the Easy-Switch button for three seconds. This will put the keyboard in discoverable mode so that it can be seen by your computer. The LED will start blinking quickly. 2.
PAGE 3
If you are a Windows, Linux and Android user, the special characters will be on the right side of the key: If you are a macOS or iOS user, the special characters and keys will be on the left side of the keys: Battery Status Notification Your keyboard will let you know when it is running low. From 100% to 11% your LED will be green. From 10% and below, the LED will be red. You can continue typing for more than 500 hours without backlighting when the battery is low.
PAGE 4
Smart backlighting Your keyboard has an embedded ambient light sensor that reads and adapts the level of backlighting accordingly. Room brightness Backlight level Low light - under 100 lux L2 - 25% Mid light - between 100 and 200 lux L4 - 50% High light - over 200 lux L0 - no backlight* Backlight is turned OFF. *Backlight is turned OFF. There are eight backlight levels.
PAGE 5
2. Backlighting disabled There are two factors that will disable backlighting: When your keyboard has only 10% of battery left when you try to enable backlighting, this message will appear. If you want backlight back, plug your keyboard to charge. When the environment around you is too bright, your keyboard will automatically disable backlighting to avoid using it when not needed. This will also allow you to use it longer with backlight in low light conditions.
PAGE 6
You can use the mouse cursor to move from one computer to the next. MX Keys keyboard will follow the mouse and switch computers at the same time. You can even copy and paste between computers. You will need to install Logitech Options software on both computers and follow these instructions. You can check which other mice are Flow enabled here.