User Guide

9/21/2017 G29 - Logitech Support
http://support.logitech.com/en_us/product/g29-driving-force/faq#link_Optimize-pedal-face-positions-on-the-G29-or-G920-racing-wheel 34/45
Before mounting and securing the wheel unit, make sure to connect the power adapter, pedal unit,
and Driving Force Shifter attachment (where applicable) to the connection ports on the underside of
the wheel unit. See the Cable Management section for details.
To mount the wheel unit to a racing rig using the bolt mounting points, you’ll need two (2) M6X1
screws to securely fasten the wheel unit to the racing rig.
NOTE: Bolt mounting may also be supplemented with the built-in clamping system (where applicable).
For more information on using the clamping system, see Mount and secure the G29 or G920 racing
wheel using the clamping system (/article/Mount-and-secure-the-G29-or-G920-racing-wheel-using-
the-clamping-system).

Pedal Unit
The pedal units on the G29 and G920 racing wheels are also equipped with built-in bolt mounting
points that can be used to secure the pedal unit to a racing rig.
To mount the pedal unit to a racing rig using the bolt mounting points, you’ll need six (6) M6X1 screws
to securely fasten the pedal unit to the racing rig.

Cable Management
For optimal cable routing, USB and pedal cables (1, 2) should be routed through the inner channels.
The power and optional shifter cables (3, 4) should be routed through the outer channels.
Cables may be wrapped multiple times around cable management cleat to take in slack.
(http://buy.logitech.com/store/logib2c/DisplayShoppingCartPage)