User Guide
3. In the Properties window, select the Details tab.
4. In Property drop down menu, select Hardware Ids. Under Value, you will see a string of
letters and numbers. Use this information to find the correct HID for your device. For
example with the X52 Pro, you’ll see HID/VID_06A3&PID_0762&REV_0123:
VID = Vendor ID. This is specific to each manufacturer. For Saitek products, this will
always be 06A3.
PID = Product ID. This value is specific for each product within the VID.
REV = Firmware revision number. In this case, for the X52 Pro in this example,
the revision number is v1.23.
5. Once you’ve determined the right HID part of the device, click OK.
6. In Device Manager, right-click the entry again, click Update Driver Software, and then
select Browse my computer for driver software.
7. In the Browse for driver software window, click Browse, and navigate to the desktop or
the location where you extracted the package folder.
8. In the extracted folder, select the folder with the same PID as the device you are
updating, and click OK.
9. In the Update driver Software window, click Next. The driver should start installing.
NOTE: If you get a Windows Security Window pop-up, click Install.
10. If you look in Device Manager, you should see the device has drivers and is named
correctly. In this example, the HID-compliant game controller now appears as Saitek X52
Pro Flight Controller (HID).
Update the driver for the USB device:
1. Next, you’ll need to update the driver for the USB input device. The process is the same
as for the HID. All mice/keyboards/joysticks will have their USB entry in the Human
Interface Devices section.
2. Right-click the entry and look for the correct VID (and PID if you know it). Update the
driver by browsing in the same extracted folder.
3. Verify that both parts of the device are working and that the drivers are listed in Device
Manager.
Rudder lock for the X-55 Rhino / X56 H.O.T.A.S.
There is no physical rudder lock on the stick itself, but you can always disable the twist axis
using the HUD software in case you don’t need it or want to use rudder pedals. You can
download the software from the Logitech Downloads Page.