User Guide

1 of 2 | P a g e

Updated April 26, 2013

The Canisius College Media Center Presents

Logitech BCC950 ConferenceCam Guide

Topic 1: Setting Up the Camera

1. Turn on the computer and

allow it to fully boot up.

2. Attach the web camera to the

stand and then attach the stand

to the speakerphone base.

3. Connect the appropriate end

of the power adapter to the

power port on the back of the

speakerphone base. Next,

connect the other end to an

available electrical outlet.

4. Connect the USB cable from the

speakerphone base to an

available USB port on the

computer.

5. The included remote control allows you to pan, tilt, and zoom the camera, as well as adjust

the volume of the speakerphone. These settings can also be controlled with the buttons

found on the speakerphone base itself.

PAGE 1
of 2 | P a g e The Canisius College Media Center Presents Logitech BCC950 ConferenceCam Guide Topic 1: Setting Up the Camera 1. Turn on the computer and allow it to fully boot up. 2. Attach the web camera to the stand and then attach the stand to the speakerphone base. 3. Connect the appropriate end of the power adapter to the power port on the back of the speakerphone base. Next, connect the other end to an available electrical outlet. 4.
PAGE 2
of 2 | P a g e Topic 2: Skype Setup PC Instructions After signing in to Skype, follow these steps to make sure the Logitech BCC950 ConferenceCam is selected: Mac Instructions After signing in to Skype, follow these steps to make sure the Logitech BCC950 ConferenceCam is selected: 1. Click on “Tools” in the toolbar and then “Options”. 1. Click on “Skype” in the toolbar and then “Preferences”. 2.