GROUP Setup guide | Guide d’installation
CAMERA 1. 10X lossless zoom 2. Camera LED 3. Kensington security slot HUB 4. 5. 6. 7. 8. Hub LED Power USB Camera Speakerphone CAMERA ACCESSORIES 10. 1. 2. 3. 11. 12. 13. 14. SPEAKERPHONE 9. Kensington security slot ACCESSORIES 10. Camera mount 11. Hub velcro mount 12. Cables clip 13. Cables 14. Power adapter 15. Expansion Microphones HUB 4. 5. 6. 7. 8. SPEAKERPHONE EXPANSION MICROPHONES (OPTIONAL) 15. 9.
CONNECTION AND SETUP Setup and connection to a computer 1. Set the camera on the table, or using the included camera mount on the table or a wall. See alignment pin for position 2. The hub can be on placed on a table or mounted underneath using the included hook and loop pads.
CONNECTION AND SETUP Setup and connection to a computer 3. Connect the cable between the speakerphone and h ub. Simply match the colored ends of the cables to the corresponding color marks on the speakerphone and hub. Connect the cable between the camera and hub. Simply match the colored ends of the cables to the corresponding color marks on the camera and hub. If you’re using the optional Expansion Microphones, connect them to the appropriate jacks on the bottom of the speakerphone.
CONNECTION AND SETUP Setup and connection to a computer Cable slots Press the cables into the slots on the bottom of the speakerphone. Connect the power cable to the hub and plug in the power adapter. The display on the speakerphone will turn on and show the Logitech logo when powered. 4. Connect the hub to a USB port on your computer. The speakerphone display will also prompt you to make this connection.
CONNECTION AND SETUP Setup and connection to a computer 5. Attaching cable lock • Attach Cable Lock to cable end that connects to the camera. • Plug Cable Lock into the slot of the housing of the camera. • Rotate the Cable Lock clockwise to lock the cable. A. B. C. 6. Optional: connect computer to external display such as a television, monitor or projector. Note regarding longer cables: GROUP includes 5m/16’ cables to connect the speakerphone and camera to the hub.
CONNECTING TO BLUETOOTH® DEVICE To connect GROUP to your mobile device: • If your device is NFC enabled, touch the mobile device to the NFC icon on the speakerphone, which should enable Bluetooth acceptance on the mobile device OR • Hold down the Bluetooth button until the Activity light on the speaker-phone starts blinking blue rapidly. Follow the instructions on your mobile device to pair with Bluetooth. Note: When GROUP is paired and connected, the Bluetooth icon on the speakerphone will appear bright.
7. 1. 2. 3. 8. 4. 5. 2. 9. 10. 11. 6. REMOTE and EXPANSION MICROPHONES 1. 2. 3. 4. 5. 6. 7. Call answer Microphone mute Volume down Camera pan/tilt Camera zoom out Camera presets Call end 8. Volume up 9. Camera zoom in 10. Near/Far camera control 11. Remote battery door. The GROUP remote control runs on a Li-ion CR2032 battery. Battery life will vary based on usage.
13. 14. 12. 9. 8. 1. 6. 7. 10. 11. 5. 2. 4. 3. 15. SPEAKERPHONE 1. Answers incoming calls in supported applications. • Note: Call Answer and End buttons may not work in some applications so simply use your video application to answer and end calls. To enable answer and end buttons for Skype or Cisco Jabber, please download the respective plug-ins available from www.logitech.com/support/group. 2. Mutes the microphones. 3. Decreases the speaker volume. 4. Pans and tilts the camera.
VISIT PRODUCT CENTRAL Discover your product’s full potential. Get valuable information and usage tips by browsing easy-to-use FAQs. Find answers to product questions and get help setting up your product. See if there’s software available for download that can enhance your product experience. To enjoy all the benefits of your Logitech product, visit www.logitech.