Product Data Sheet / Brochure

VAD (Voice Activity Detector)
Background noise suppression
Mute button with LED status indicator
Captive 9.6 ft (2.95m) 12-pin cable
Daisy chain up to 7 Rally Mic Pods
Frequency response: 90Hz – 16kHz
Sensitivity: >-27dB +/-1dB @ 1Pa
Microphone data rate: 48 kHz
Recommended # of participants:
Rally (one Mic Pod): 10
Rally Plus (two Mic Pods): 16
Additional participants per Mic Pod: 6
Recommended participants for Rally with 7 Mic Pods: 46
RALLY SPEAKER
High-performance 3” (76mm) driver with rare-earth magnet
Patent-pending suspension system eliminates vibration-induced camera shake and audio interference
Mini XLR cable connects to Rally Display Hub for both signal and power
Speaker volume 95dB SPL @1W, 100dB SPL @7.5W, both +/-2dB at ½ meter
Sensitivity: 95+/-2dB SPL at ½ meter
Distortion: 200Hz–300Hz < 2.5%, 300Hz–10kHz < 1%@7.5W
Speaker sampling rate: 48 kHz
RALLY TABLE HUB
Single CAT6A cable connection to Rally Display Hub (16.4 ft / 5m cable included, supports customer-
supplied cables up to 164 ft (50 m)
Active speaker detection: analyzes audio from up to 7 Mic Pods and 56 beams every 8ms
12 Pin connector for Rally Mic Pod
HDMI Type A passthrough to Display Hub (x2)
USB Type C
USB Type A (reserved for future capability)
USB Type B (connects to meeting room computer)
RJ45 (reserved for future capability)
Power input
RALLY DISPLAY HUB
HDMI Type A (x2) (connects to displays)
USB C (connects to Rally Camera)
USB Type B (connects to meeting room computer)
RJ45 (connects to Table Hub)
Mini XLR (x2)
Powers one or two Rally Speakers
Power input
REMOTE CONTROL
RF remote control (line of sight not required)
CR2032 batteries (included)
CABLES / POWER
Camera to Display Hub
6.5 ft (2m) USB 3.1 Type C to USB Type C 3.1
Conference Room Computer to Display or Table Hub
6.5 ft (2m) USB 3.1 Type A to USB Type B
Display Hub to Table Hub
16.4 ft (5m) CAT6A Ethernet cable (supports customer-supplied cables up to 164 ft (50 m)
Display Hub to Speaker (x2)
9.6 ft (2.95m) Mini XLR (supports customer-supplied extension cables up to 9.8 ft (3m)
Conference Room Computer to Displays (x2)
6.5 ft (2m) HDMI A
Mic Pod
9.6 ft (2.95m): Hardwired with 12 pin connector
Power Outlets to Power Supplies (x2)
3.2 ft (1m)
Power Supplies to Table Hub / Display Hub (x2)
4.9 ft (1.5m)
AVAILABLE ACCESSORIES
RALLY MOUNTING KIT
Rally Mounting Kit with cable retainers (x2) and mounting brackets for camera, speakers (x2), and
hubs (x2)
RALLY MIC POD
Deploy up to 7 Rally Mic Pods for greater audio coverage in larger rooms
RALLY MIC POD HUB
Connect 1-3 Rally Mic Pods (or additional hubs) for placement flexibility and under-table cabling