Owner's Manual

English 9
User’s Guide
Connect the receiver
Fit the adapter onto the AC adapter plug of the receiver, making sure the adapter
snaps into place.
Plug the AC adapter into an electrical outlet, and then insert the barrel plug into the
receiver. The LED on the front of the receiver should blink red, indicating that the
receiver is powered up, but is not yet programmed for your network.
Connect your stereo or powered speakers to the receiver, using the supplied color-
coded, gold-plated RCA cables, which can be used with nearly any stereo or powered
speaker system. You can also connect the receiver to a DAC via the SP/DIF connector,
using your own optical or coaxial cable.
1.
2.
3.