Network Card User Manual

Getting Started Guide

Logitech

HD 200a Powerline Starter Kit

2 Network adapters

2 Ethernet cables

2 wall spacers

Documentation

Power-strip Warning!

Do NOT plug the network adapter into a surge protector or power strip as they

interfere with network communication. The network adapter(s) must be plugged

directly into your wall outlet. Surge protectors are built-in to the network adapter

and protect your devices.

Logitech HD 200a Powerline Starter Kit

1) Plug one end of the Ethernet cable connector into the network adapter.

1a) Add the optional wall spacer.

1b) Plug the network adapter into the power outlet.

2) Connect the other end of the Ethernet cable connector into an open port on

your router.

1) Take the second network adapter and plug one end of the Ethernet cable

connector into the network adapter.

1a) Add the optional wall spacer.

1b) Plug the second network adapter into the power outlet by the device

you will be connecting to.

2) Connect the other end of the Ethernet cable connector into the ethernet

port of your device (i.e. gaming console, laptop, etc.).

Turn the device on and test.

INTERNET

Off

Welcome.

Thank you for purchasing Logitech HD Powerline products. With Logitech powerline

home products you can easily network devices in your home using your home’s

existing electrical wiring. No new wires to run, no networking hassles.

Logitech HD 200a Powerline Starter Kit

Quick-start

guide

Logitech

HD Powerline 200a

Networking Starter Kit

Logitech

HD Powerline 200

Networking Adapter

System Requirements

& Support Guide

(not included)

PAGE 1
Getting Started Guide Welcome. Logitech HD 200a Powerline Starter Kit Thank you for purchasing Logitech HD Powerline products. With Logitech powerline home products you can easily network devices in your home using your home’s existing electrical wiring. No new wires to run, no networking hassles. 1 Logitech HD 200a Powerline Starter Kit 1) Plug one end of the Ethernet cable connector into the network adapter. 1a) Add the optional wall spacer. 1b) Plug the network adapter into the power outlet.
PAGE 2
Network Floor Plan LED Status Section Logitech HD 200a Powerline Starter Kit Network Adapter Diagnostic LEDs What do these LEDs tell me? Network Status LEDs What do these LEDs tell me? LED On/Off Toggle Switch Software and advanced configuration Customer Support How do I turn the LEDs off? Logitech HD Powerline products come with 128 bit encryption to secure the powerline network.