UE 9000 Wireless Headphones user guide
Power up. Turn on the UE 9000 Wireless Headphones. Turn on your UE 9000 Wireless Headphones. The Bluetooth® LED should blink blue rapidly, indicating that the headphones are discoverable.
Sync up. Press Play. Press play on your media device. Optional: Pair additional Bluetooth-enabled devices. You can pair your headphones with up to eight devices. To do so: Pair your headphones with your Bluetooth-enabled device. Apple iOS® Go to Settings > General > Bluetooth. Turn on Bluetooth. Select “UE 9000” from “Devices.” 1. Move the slider to the “Bluetooth” position and hold it there until the Bluetooth LED blinks rapidly blue, indicating that the headphones are discoverable. 2.
What’s in the box: GET TO KNOW YOUR UE 9000 WIRELESS HEADPHONES. UE 9000 Wireless Headphones Molded travel case On/Off/Bluetooth connection slider Optional audio cable with on-cord mic and controls Bluetooth LED USB charging cable Battery level LED AC adapter ¼-inch (6.
Features: LED Behavior. Bluetooth LED Battery Level LED Off Headphones off or connected to an audio source via the 3.5 mm jack Off Headphone off Blue (blinking rapidly): Discoverable/pairing mode Green (pulsing slowly): Charging Blue (blinking slowly): Connecting Green (solid): Power on; fully charged Red: Low battery Blue (solid): Connected When in wireless mode, all LEDs turn off automatically. However, the LEDs will illuminate when there is a pairing change or a control is activated.
Features: CharginG. Computer USB port or Micro USB charging port USB charging cable AC power adapter Typically a three-hour charge through an AC outlet provides up to 10 hours of power, and you can use your headphones while they’re charging. When the battery level LED turns red, you should recharge your headphones. To do so: 1. Charge the headphones via the supplied AC adapter or USB. The battery level LED will pulse green. 2.
Features: TRAVEL STORAGE. To safely store your headphones while you’re on the go: 1. Swivel the ear cups until they “click”. 2. Place the headphones flat in their case. 3. Place the AC adapter in the top pocket. 4. Place all cables and accessories in the bottom pocket.
Product Central. There’s more information and support available for your product online. Visit Product Central, where you can: • • • • Browse online articles and tutorials. Find tips about usage and information about additional features. Get help troubleshooting a problem. Download the latest software for your product. • Find online documentation and warranty information. • Connect with other users in our Community Forums to get advice, ask questions and share solutions.
Troubleshooting. If your headphones are not working or pairing/connecting properly, try the following: • Move closer. The range of the Bluetooth wireless connection is up to 10 meters or 30 feet. • Recharge, particularly if the battery level LED is red. See “Charging.” • Try increasing the volume on the headphones, on your device or in your media application. And if you’re connected to a computer, check the volume settings for your operating system.
Battery Removal and Recycling 1. Peel and remove the ear pad from the left ear cup. 2. Remove screws to disassemble the speaker chamber. 3. Unplug the old battery. 4. Dispose of old battery at an authorized battery recycling center.
HEADPHONE DISASsEMBLy Remove screws Unplug battery Peel and remove earpad LEFT EAR CUP
© 2012 Logitech. Logitech, the Logitech logo, the Logitech UE logo, and other Logitech marks are owned by Logitech and may be registered. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.
www.logitechue.com 620-004494.