Getting started with Première utilisation BH970 Wireless Mono DECT Headset Logitech for Business
BH970 Wireless Mono DECT Headset Contents English. . . . . . . . . . . . . . . . . . . . . . . . . . 4 Français. . . . . . . . . . . . . . . . . . . . . . . . . 14 www.logitech.com/support/BH970 . . . . . . . . . . . . . . . . . . . . .
BH970 Wireless Mono DECT Headset Getting started with Première utilisation BH970 Wireless Mono DECT Headset Logitech for Business 3
BH970 Wireless Mono DECT Headset 1 5 2 7 3 6 8 4 Figure 1: BH970 Wireless Mono DECT Headset diagrams 1 3 2 14 13 4 5 6 Figure 2: BH970 Wireless Mono DECT base diagrams 4 English 7 8 9 10 12 11
BH970 Wireless Mono DECT Headset Headset diagrams Base diagrams 1. Multifunction button 2. Touch panel 3. LED indicator 4. Microphone boom arm 5. Speaker 6. Mount for wearing-style attachments 7. Recharge contact 8. Noise-cancelling microphone 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
BH970 Wireless Mono DECT Headset Setup Step 1: Select your setup method www.logitech.com/support/BH970 Step 2: Select and prepare the Headset 6 English The easiest way to connect and configure the BH970 is to use the Interactive Setup Wizard available online here: www.logitech. com/support/BH970. The setup section of this quick start guide is only needed if the Interactive Setup Wizard is not used. Attaching the headband OR 1.
BH970 Wireless Mono DECT Headset Step 3: Connect to power Step 4: Dock the Headset Step 5: Connect to PC 1. Plug the supplied power adapter into the port marked on the base. 2. Connect the power adapter to the mains power socket. Dock the headset. When docked correctly the headset battery will begin charging, if needed. Charge for 20 minutes or until battery indicator is steady green. Keep the headset docked during setup. 1. Plug the supplied USB cable into the port marked on the base. 2.
BH970 Wireless Mono DECT Headset Step 6: Select and connect to a desk phone Connecting to a desk phone will vary depending on the type of desk phone used. Connect to a desk phone with OR headset port This type of desk phone has a dedicated headset port (usually at the back of the phone). These phones typically have a button on the front panel for switching between handset and headset. 1. Plug the supplied telephone cable into the port marked on the base. 2.
BH970 Wireless Mono DECT Headset Connect to a desk phone with electronic OR hookswitch An electronic hookswitch enables an incoming call to be answered or ended by the headset´s multi-function button. Contact your local Logitech dealer to purchase an electronic hookswitch adapter. 1. Plug the supplied telephone cable into the port marked on the base. 2. Connect the telephone cable to the headset port on the desk phone. 3. Plug the electronic hookswitch adapter into the port marked AUX on the base. 4.
BH970 Wireless Mono DECT Headset Step 7: Make a test phone call Test call from desk phone 1. Ensure the headset is docked, and then press and hold the desk phone button on the base keypad until the desk phone icon changes to . 2. Remove the front panel of the BH970, as illustrated. 3. Put on the headset. The desk phone icon will change to . If the icon does not change, tap the desk phone button on the base keypad. 4.
BH970 Wireless Mono DECT Headset Troubleshooting If you cannot hear anything or the sound is distorted during the desk phone call, try rotating the clear dial tone switch from A-G until the sound is optimal. For more information, see “3.1 Configuring for Desk Phones” in the BH970 Wireless Mono DECT Headset User’s Guide at www.logitech. com/support/BH970. Test call from PC (softphone) 1. Install the PC Suite . Software available online here: www.logitech.com/support/ BH970. 2.
BH970 Wireless Mono DECT Headset Headset multi-function button Multi-function button Touch panel The multifunction button is located on top of the headset, and manages calls on the target phone. You can answer calls, end calls, switch between held calls, and more, using a combination of taps, double-taps or presses. Headset volume control The volume control is a touch-sensitive panel located on the arm of the headset, and controls the headset speaker volume and microphone mute/unmute.
BH970 Wireless Mono DECT Headset Base Keypad The BH970 base keypad displays information about the headset and call status, and has controls for call handling. From here, you can change target phone, answer an incoming call, end the current call, or open an audio link to the current target phone.
BH970 Wireless Mono DECT Headset 1 5 2 7 3 6 8 4 Figure 1: Schémas du micro-casque BH970 1 3 2 14 13 4 5 Figure 2: Schémas du socle du BH970 14 Français 6 7 8 9 10 12 11
BH970 Wireless Mono DECT Headset Schémas du micro-casque BH970 1. Bouton multifonction 2. Pavé tactile 3. Voyant lumineux 4. Bras articulé du microphone 5. Haut-parleur 6. Support pour les fixations de port d’oreillette 7. Contact de recharge 8. Microphone anti-bruit Schémas du socle du BH970 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
BH970 Wireless Mono DECT Headset Configuration Étape 1 : Sélectionnez votre méthode de configuration www.logitech.com/support/BH970 La manière la plus facile de connecter et de configurer votre BH970 est d’utiliser l’assistant d’installation interactif disponible à cette adresse: www.logitech. com/support/BH970. La section de configuration de ce guide de démarrage rapide n’est nécessaire que si vous n’utilisez pas l’assistant de configuration interactif.
BH970 Wireless Mono DECT Headset Fixation du contour d’oreille OU 1. Assemblez la fixation de port d’oreillette du contour d’oreille pour l’utiliser sur l’oreille gauche ou droite. Si nécessaire, retirez l’embout d’écouteur et remplacez-le par un embout d’une autre taille pour qu’il s’ajuste correctement. 2.
BH970 Wireless Mono DECT Headset Étape 4 : Connexion de l’oreillette dans la base Connectez l’oreillette dans la base. Une fois l’oreillette correctement connectée, la batterie commence à se charger, si nécessaire. Chargez l’appareil pendant 20 minutes ou jusqu’à ce que le voyant d’état de la batterie devienne vert fixe. Laissez l’oreillette sur son support pendant la configuration. Étape 5 : Connexion à l’ordinateur 1. Branchez le câble USB fourni sur le port du socle. 2.
BH970 Wireless Mono DECT Headset Étape 6 : Sélectionnez et connectez à un téléphone fixe La connexion à un téléphone fixe varie en fonction du type de téléphone fixe utilisé. Connexion à un téléphone fixe avec Port OU d’oreillette Ce type de téléphone fixe est muni d’un port dédié à l’oreillette (généralement à l’arrière du téléphone). Généralement, ces téléphones ont une touche située sur le panneau avant qui permet de commuter la conversation entre le combiné et l’oreillette. 1.
BH970 Wireless Mono DECT Headset Connexion à un téléphone fixe avec OU Hookswitch électronique La fonction Hookswitch électronique permet de répondre à un appel entrant ou d’y mettre fin à l’aide du bouton multifonction de l’oreillette. Contactez votre revendeur Logitech pour acheter un adaptateur de prise d’appel électronique. 1. Branchez le câble de téléphone fourni sur le port du socle. 2. Connectez le câble de téléphone au port de l’oreillette du téléphone fixe. 3.
BH970 Wireless Mono DECT Headset Étape 7 : Effectuer un appel test Appel test depuis un téléphone fixe 1. Vérifiez que l’oreillette est connectée dans la base, puis effectuez un appui prolongé sur la touche de téléphone fixe située sur le clavier du socle jusqu’à ce que l’icône du téléphone fixe prenne l’aspect suivant : . 2. Retirez le panneau avant de la BH970, comme l’indique l’illustration. 3. Mettez l’oreillette. L’icône du téléphone fixe change et prend l’aspect suivant : .
BH970 Wireless Mono DECT Headset 6. Vérifiez le volume sonore. Si votre interlocuteur dit que le volume est trop faible ou trop fort, réglez le volume du microphone sur le socle, comme l’indique l’illustration. Veillez à ce que l’interlocuteur ne règle pas le volume de son côté. 7. Lorsque vous avez terminé, terminez l’appel et revenez au panneau avant de la BH970. Appel test depuis l’ordinateur (logiciel de téléphonie) 1.
BH970 Wireless Mono DECT Headset 4. Effectuez un appel test. Mettez l’oreillette et composez le numéro de téléphone d’un ami ou d’un collègue à l’aide du logiciel de téléphonie. L’icône du logiciel de téléphonie prend l’aspect suivant : . 5. Lorsque vous avez fini, terminez l’appel.
BH970 Wireless Mono DECT Headset Clavier du socle Le clavier du socle de la BH970 affiche des informations sur l’état de l’oreillette et de l’appel ; il comporte également des contrôles de gestion des appels. Il permet de changer de téléphone cible, de répondre à un appel entrant, de mettre fin à un appel en cours ou d’ouvrir un canal audio vers le téléphone cible en cours.
BH970 Wireless Mono DECT Headset www.logitech.
www.logitech.com/support/BH970 © 2011 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. Jabra is a registered trademark of GN Netcom A/S. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice. © 2011 Logitech. Tous droits réservés.