User Manual

Adjustments:
The MS100 film sensor and KF100
Key FOB are pre adjusted from the manufacturer and
“DO NOT” require additional tuning or adjusting.
Wiring:
The MS100 film sensor has three wires that
must be connected in order for the module to work
properly. The “RED” wire is connected to positive
volts DC. The “BLACK” wire is connected to negative
12 volts DC. The “GREEN” wire produces a positive
12 volt DC output and is connected to the input of
another device, which could be an alarm device or a
communication device.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following tow conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received,
Including interference that may cause undesired
operation.
LOJACK CORPORATION
FCC ID: IDIKF100
3