User's Manual

Tracking
This function allows the host to monitor which Guest or Staff pager has been paged, and continues paging,
based on a user defined interval and run time setting. The pager number is cleared on the keypad unit when
run time is complete or when user clears the number by press the Function Key (F1-F4) under the number.
To turn Tracking on (or off):
1. Press SETUP and enter Password.
2. Press F2 (DN) until screen displays 1) Tracking.
3. Select 1 (Tracking).
4. Select 1) Enable.
5. Press F1 (YES) or F2 (NO).
To Use Tracking
1. Page the guest or staff pager using the basic
paging procedure.
2. The pager number will appear at the bottom of
the screen signifying that the pager is being paged.
3. When the page has been received and acknowledged, clear the page by pressing the F1, F2 or
F3 key under the pager number shown on the keypad display.
• If more than 3 pagers are in the queue “ ” will be shown at the right of the display.
• Press F4 to see the rest of the list.
Custom Tracking
Tracking Intervals
The tracking feature can be set to a user defined duration and paging intervals.
Duration
The Duration is the total amount of time the repeated pages will continue for in seconds.
For example, if you choose 120 seconds, the LRS Connect Transmitter will continue to page at the predefined
interval until the overall 2 minutes (120 seconds) is timed out.
The default duration is 90 seconds.
The duration can be set for 0-3600 seconds.
To Set the Duration
1. Press SETUP and enter Password.
2. Press 1) system.
3. Press F2 (DN) until display shows 1) Tracking.
4. Press 1.
5. Select 2) Duration.
6. Type in a new time, in seconds and press ENTER.
Note: Entering 0 will make the Duration run “Forever”
Long Range Systems 12 LRS Connect Transmitter User Manual
Transmitter Tracking Screen
12:34 PM
GUEST #: - - -
PGR PGR
99 82 92
CANCELS
STAFF 99
CANCELS
GUEST 82
CANCELS
STAFF 92
SCROLLS
THROUGH
PAGER LIST
PAGERS IN
THE QUEUE